nunya

pit amber bulbs in, they will get that orange hue then when lit

merged your 2 topics together too

little more info would be helpful but if that were local to me, with no info as long as it was complete (full driveline/interior/body ect... even if a lot of it is junk) I would buy it for 400, scavenge every useful bolt and scrap whats left and probably still be ahead in the $$ end plus have (moar) parts

I actually have SilverStars in the 4runner, they ARE noticeably brighter (even out of adjustment) and have been in there for like 2 years so far (I think... like a month after I got it). Not saying run out and buy them but I ended up with a workign pair

shoulda used it as your ladder brace... no moving/falling ladder then! nope, thats actual work!

my Christmas present? Making one for my 4runner too?

Looks leaf sprung in the rear, so suspension would basicly be HB I would summise. Bodylift could be a toss-up depending on the bodhmount setup. I'd rather have my hands on it to be more certian though. Looks neet but for some reason looks like its proportioned wHierd to me too Least it got RHD and a diesel

don't forget the HB marker lights to get the complete blend with the grill! And I always kinda liked the off centered badge on that grill... Kinda old Ranger-esqe if you get what I mean (or just constantly switch it around screwing with people.

Especially if it's gonna be popping up in some snow belt or beachfront areas

What, bald?

Ahh... I couldn't remember the ordeal and who it was. Honestly didn't even think of it until I was typing that so had to add it to the beginning. Nobody said I was a genius

Did THIS, changed my fuel filter, and put my magnet on Yea I think I devoted a whole 30 seconds to him today

Now I remember someone trying to/wanting to put a filler hole filter in their wd21 (like r50s apparently have, yet theirs don't work in a wd21 bottle)and for some reason I got the urge to do it today. The steps are simple for a factory looking/working setup. Tools required: 1 hand with working fingers Parts required: 1 washer bottle filler filter from a 2nd generating Toyota 4runner (89-95 I believe is the range) Step 1 - open hood Step 2 - open washer fluid bottle Step 3 - pick up 4runner donated filter/screen thingie Step 4 - Stick it in the hole (perfect fit) Step 4.a (optional but generally a good idea) fill bottle with preferred washer fluid Step 5 - Close lid Step 6 - close hood and enjoy Yea, I know... Pretty pointless but someone will use/enjoy it

REALLY big envlope

Stock wd21 bumpers are basicly show to begin with

You got the basic idea already... As you proably found out in your searches here though is there is a rather mutual distaste for them.

it aint winter wheel time yet I didn't even decide what wheels i'm using this winter let alone dig them out/think about flipping tires to them

...or you can put WAAAAAAY too much effort into getting factory spare tire carrier brackets out of a j/y truck

I belive kiwipete intercooled his truck, might be worth a peek at his members rides thread. Download the photobucket app, it's free and you can load pics right into it then use the img codes right into your posts to put pics in

Technically that's any interior handle that ain't mounted to a cage (though I've hung my 150-160 lb arse from my added drivers overhead handle), but as said I'd prefer to have my hand there than other impulse places it could end in a "greasy side up" situation. Plus they are nice for pulling yourself in when you don't what to reach completly 'up'

The benefits of the pilar mount are unknown until you have one.

Bananas are an excelent source of potassium?

+15 street cred! that made it completely awesome

Compression rod bushings? Tire rod end? Wheels bearings? Lug nuts falling off? Time to check that front end out there!

It has a point, I don't remember it exactly though. Something about helping with noise interference through the radio or something completly unrelated. Before I went Maxi alty one of my stock ones had that little dorky things...