Fukinitupagain

I just hope that if that is his car & his girl that it is his hand prints on the lower part as apposed to some other guy's...

Cont...

Cont...

Cont...

I've posted some of these else where before but since there is an entire thread devoted to it here we go (mods edit approprietly cause I have no filter):

Why is that?

Actually the 96-99 R50's are fairly standard but the 99.5-04 are a bit different & yes do require a bit of modification. Where the hell is Alexrex anyway?

That wouldn't be hard to do. You could cut out a decent protion of the trunk & put a fuel cell there plus you could have a larger capacity fuel tank (yeah I've thought about this in the last year or so). Didn't SystemF think about doing this at one point?

I run KYB GR2's up front I only have the Ranchos in the rear. I couldn't be more happy with the KYB's (super nice ride).

I had RS9000XL & busted one & Rancho sent me a RS5000 as a repalcement... The product sucks & the company sucks even harder. The next time I'm either going with Bilsteins or Fox.

Corbeau has brackets for Frontiers/Xterras & if I'm not mistaken that'll work on R50's as well. I knoiw that Xterra seats bolt right into R50's so I would assume the same as aftermarket brackets for aftermarket seats but you never know until you try it I guess.

Thats where they all are unless you have a snorkel

When I did my engine swap back in Dec. I swapped in a Quest alt.

Ah ya see thats the problem you would consider puting it on your Pathy, lol.

Nice & well deserved

1st off use the search button. Theres a ton of cra around here regaurding this all you need to do is just look around but being I'm in a not bad mood I'll throw you a bone kiddo... Lifts: AC 2" lift - only buy the lift coils from them cause you can find the struts/shocks cheaper elsewhere. the rear coils are in the rear suspension section on the left hand side just look Old Man Emu 1.25-1.5" lift - same as AC's lift only get the lift coils & find the stuts & shocks you want cheaper else where. .75-1" Stuts spacers - there are couple of people around this board that actually make them, one of them is Daddyrim, look him & his company up (from what I've heard he's great to work with) here is a general link to a discussion here about lifts, and another one. Exhaust: I run a Magnaflo, but to be honest your not gonna get a deep throaty sound out of an R50 no matter the muffler (unless its Tyler Morgan's but thats a whole nother story). I didn't get it to sound better or perform better, my exhaust & muffler were shot-to-sh!t so I had to & went with Mganaflo (which I couldn't be happier with, seriously) Tires: I'm not gonna talk about tires, I'm just gonna send you to a link, cause this has been talked about to exhausting lengths (infact theres a couple of stickied threads in the this section alone) Link to TIRE discussion

Y a gotta pay to play. The high costs is what keeps the enviro-nazis at bay at any offroad park.

I'm gonna extend my rear arms b/c I want to run lifted Bronco coils in the rear with the SFD instead of spacers/blocks but I'm wondering if I'm gonna have to modify my panhard bar for this to work. Thats why I was saying I'd be interested in the panhard bar. I think it'll be one of those hurdles I'll tackle when I get there but since you've already done it I was curious as to your thoughts (sorry to hi-jack Tyler but Richard & I discussed this a bit back & never came up with a definate answer)

Yeah I'd be interested in an adjustable panhard bar.

I'd go with the XJ's, low & wide dude, low & wide (I know, I know, I'm not SASed but I've been around enough of them & seen enough of them being built & watched enough roll as well because they were too high & not wide enough-COG).

Look in the Vehicles For Sale section

If I am not mistaken you are in the wrong section with that KovmanN... these are R50's (97-2004) not WD21's (86.5-95) but eh, thakns for the imput.

Max's R50 at Rausch Creek but not exactly stock though...

It should. Definetly would with a spacer. If my memory is correct Max ran a 35x14.50 on a 15x12 rim with no spacer & it worked.

It would be Northeast if it were moved. Hey Nunya, I thought you were in TX?