Runnerman

Ok last little trail ride on Sunday did this. So does anyone know if the 02 ARB Bull bar will fit the 03's pathy's. I think everything is the same but could be wrong anyone install an ARB on a 03 that you know of? Thanks

I know it's nut's to pay $250 just for a colour of powdercoating but it is nice just had mine custom coated. What do you guys think? Here's the pic but it doesn't do it justice as it is a textured colour feels like snakeskin.

I think a little light bar would look the best. As unless you have a steel bumper on your Pathy for that they have somewhere solid to mount them. Checked your cardomain pg and kinda hard to read it. Just thought I would let you know.

mmm, I use the regular and doesn't cause any engine noise, figure until that happens I'll stick wih elcheapo gas.

I had a jeep Liberty until I rolled it. I had allot of warranty issues with it. But I took it offroad and it did pretty good I had the prelowered Liberty and was about to lift it until I rolled it. No never get another domestic vehicle again!! rolled jeep

Everything will be right on schedule, as they are being powdercoated. Just finished the 3/16" Defender plates and sending them off to get coated soon. What happened was I started selling local after I dropped a few flyers off and they started moving. That is all I have advertised as I am still struggling to get onto the search engines.

That's a good ? I know exactly what you mean. The front skidplate weighs in at about 22lbs. Your right about the stock bolts they are I believe a grade 2. I supply the skidplates with grade5 & grade8 Bolts. Steel or zinc plated what ever I have in stock. So far the grade5 bolts that I have on my truck for the front skidplate have held up really good with not shearing off. Now remember nothing is indistructable. The Superskid comes with grade8 mounting hardware. The shield comes with grade5,Champion grade8,Defender grade8 Now you can get grade10 Bolts but the price is pretty costly. I looked into allot of different ways to mount the skidplates, but in the end the final skidplates turned out good and the finished product on my site. I was going to tap&die the holes but it made the holes very weak. A bunch of other things I tried but don't want to bore you with details. Hopefully this answers your question.

I am working on skidplates for older Pathfinders.

Hey thanks lbinh that worked my remote has no instructions on it.

Can anyone tell me how I can make my horn honk when I lock my doors. It just went silent today this happened before but it was just in for a warr. repair so I just had them fix it. But it just did it again. Any help on this mater would be appreciated !! Thank You

Ok guys looked into the Bolts allot more closer and found that Remco is still way cheaper then any of the Canadian company's that I have found and some that were not listed. This is even after shipping charges.

100k warr. How about a pic of The Tires just for we can see the Tread and of the Stream crossing that's just for we can wish we were there.

The MTR tire size is 255/70/R16 which gives me just over 1/2" more of clearence. Stock size I believe is 29.4" and new MTR size is 30.9" No I don't have a lift and I don't think I'm getting one just for the fact that I'm pretty confident in what I can put the Truck through, plus everything is protected except for the Transfer case and I'm working on that. Well hope this helps you decide just still raving about the Tires still very impressed!!

Just bought the MTR tires today and man do they have Bite! Took them on the Highway doing 70-75mph and I thought they were going to Hum or be loud this is a very quite tire. Had to go and try the New Boots out. Just came home

http://www.brafasco.com/home.htm Thanks for the links as this company carry's the bolts I need, the other does not. Also at a fraction of the cost and cheaper shipping then getting from the States. Thanks Again

In metric 8.8 means Grade5 and 10.9 means grade8 hope this helps people.

Ya I was pretty vague whoops, Metric Auto Bolts.

Home Depot does not have any of the Bolts I need. Nor does Rona or any of the other local Home Reno stores . Ya, tried a whole lot of them then after I found a local shop I think they wanted one of my legs as a down payment for some bolts. Ended up being cheaper to order from Remco even know they are located out of Country and after exchanging our mighty canadian dollar :oops: .

Sorry here is the link Remco Bolt Figure I would post it after I get them.

Ok found a place on-line 15% of the cost that I was buying them for.

Does anyone know where there is a reliable company online to purchase bolts? Thanks!

Hey Mike Sorry it took so long for a reply just came back from Vegas friday night. You can drop the front skid by itself as the rear skid would still be held on by the rear bolts and you don't have to drop that one. Hope that helps.

Ok how much do Grill guards go for and what do they weigh? As I am going to be covering the cost of shipping on everything I sell now. This Bush Bar is going to be heavier in weight then a Grill guard. So anyone out there have a Grill Guard can you post the weight. Thanks

Ya lol didn't think of that.