kmgar99

Yup, 4 wheel ABS, sensor on each wheel

Check out this link.....2000 SE Pathfinder

I have a set off my 97 you can have?! Not sure if they'll fit or not...No rust, dings or dents. My Pathy has always been a SoCal car, so rust isn't even in our vocabulary. Post some photos of the breackets and stuff so i can see if they'll fit. Doens anyone know of a part cross reference manual available?

I don't know much about Pathfinder ABS but with all the gravel driving, the sensor that senses if your wheel has locked up might be hosed.... The connector could have come loose or the wires could be cracked and shorting out. My light came on for a while after i did the rear bushings...lots of drilling...all the metal filings were stuck to the sensor like a magnet...cleaned it off, disconnected the battery for 10 minutes, borrowed AutoZones OBD11 scanner and reset the error code, then all was good I'll take a picture of the plug tomorrow in the light..... Did any of that make sense!?>

Amen to that brother... Actually my wife told me those words will be my epitaph when all is good and done!

Took the picture myself a few weeks ago on my monthly trip to TJ (Tijuana Mexico)...Good cheap lobster and cerveza! Puerto Nuevo for food then back up to the Rosarito beach hotel for Tequila and Sunset! God I love Mexico!

You need to submit that beautiful truck to one of the 4x4 mags.....I would love to see a featured story on a Pathfinder!

On the drivers side of the firewall, under the hood, is a small plate you can remove, slip the wires through then bolt it back in. Here's a shot of it...it's hard to see, but you can see a bolt stickking out without a nut on it...

Welcome. Gota love those 97 SE's......

I just had both manifolds and FelPro Gaskets delivered to my house through AutoZone. One side was $51.99 and the other was $71.99 and they came with new heat sheilds. They also came with gaskets, but i figured the gaskets would be crappy....and i was right, so i ordered the FelPros at the same time. I also ordered new manifold to CAT gaskets too. All delivered to me in 4 days for $186

How the heck does that thing fit in the garage! I only have like 3 inches clearence in my garage, and that thing is more than three inches taller than mine! He must have like a 8' tall opening!

Skills wise....i could have done all of it....Time wise...No Way! I work Wayyyyy too much and too much going on at home....I was quoted double the price for all that work at several private garages...so i dont think it was that bad, especially when they were done in one day. I did order new exhaust manifolds (both are cracked) so i will be tackling that job in the next month or two.

I know! But i have no time anymore! I work way to much and way too far away!

That's my motto! Nothing can be done without Beer, burritos, and smoke (Not anymore I quit the smoke thing)

True...but i did help them get the truck back to me in one day...

I just got the Pathy back..... after they took an arm, leg and one testicle ($1300), here's what they did.... Timing Belt Water Pump Cam Seals Timing Belt Tensioner Upper and lower raditor hoses Oil pressure sensor (Leaking bad) All three belts Tranny fluid change Oil change Rear Diff fluid change I watched about 95% of all the work....Its the dealership ive bought four other Nissans and many...many parts from, so i'm no stranger to them. I would've tackled the water pump myself if i had more time....it didn't look that difficult, as long as you have a lift and a garage with an oil change pit...oh ya one more thing....three mechanics working on it at once.... BTW...They started work on it around 8am and i was driving away at 4:45pm the same day.....Anyone in San Diego....I highly recommend Mossy Nissan in Oceanside.....Good peeps...

You could try and PM LoveBunny and see if he still has my stock 97 SE rims?

Wholly Crap! My 97 never looked that clean! :cool2:

Im in for the Football team.....6' 1" 260 here! As fas as gas goes.....preach to the choir...my man...I drive 90 miles a day to and from work and i only get 13-14MPG on my best driving day. I don't think the 32" tires, 3 inch lift, roof rack, and elevation changes of 1,000 three times on my way to and from work helps either....I'm hoping the Pathy will be put away and only used as a Home Depot/Trail rig and Ill get a little commuter car like the WRX STI! Just kidding on the STI BTW....I paid $2.99 at Arco for the 87 octane last night. Arco is the cheapest around here...For a large chain that is

Are these available yet??????? I am ready for a few more!

Exactly!

If you're going to wheel it, then go with what "FLApathy" and "fordsho90" said and Rhino-lining the sucker, or compatible product (Line-X, Hurculiner, etc...) I'd gut the interior, smooth the firewall, yank the back seats to make room for cargo/spare parts and turn that Pathy into a desert runner for the Baja 1000!

Nice Signature LoveBunny! HAHAHAH

I want two White please.....Will PayPal be accepted?

Damn! Can you still drive it?