94 Pathy

Sorry for the pic size...I'll get them smaller.

Here are some pic's. Sorry it's taken so long. I'll try to get some in action also.

:type: I'm gettingready to play with photo shop and autocad with this crazy idea of ours! Once I get done I'll have something for the front and the rear doors. I'm thinking it's going to look sweet! Keep a look out for them.

I'm happy to see there are a lot of people interested in this. I'm going to try some drawings on auto-cad and link them for everyone. The safari doors for Jeeps run $154.95 in Essentials Catalog. How about the Rock Krusher rear bumpers also? I'm trying to get some prices from private fabricators. Jeep's run somewhere between $450- $550. That's pretty darn high if you ask me! Let's make the doors happen! Thanks for all the imput! -alcohol- :oops:

:idea: How many of you would like to have some safari doors for your Pathy's? I'm wondering if any of you welders out there have thought about it or can try to fab something like them. I've seen a Pathy with it's front doors off and have seen Cherokee's with thier doors off and it looks silly with just the front's off. How about both front and back with safari doors. Can anyone play around with it on a pic program to see what it would look like....Just a suggestion! I think it would look awsome! 94 Pathy

-bounce- Alright Fellow Pathy's, I got my 3" CALMINI Lift on and just had it aligned. Looking sweet! I think once I get my Stroker motor done, then a 3" body-lift with 33-35" tires will come into play. That will be awhile though. I'll try to get some pic's with-in the next few days for everyone to see. Hope you like!

crxfisher, give me your email address and I'll email you a write up on it. I can do it blind folded now! You will too after all the sh*t you have to do. 94 Pathy tuhedz3@netzero.net

Man, you all make me feel like I'm tarded! I'm gonna have to try my torsion bars again. I didn't get the lift I was expecting. The front still slopes down unlike the rear. I'm angry! :furious: Once I get it to where I want the front, I'll get an alinement and then some pic's for ya'll! All you guru's make me :oops: , but we love ya for all your knowledge. -study- Thanks guys/gals

I better check mine also. I've been hearing some popping after putting my CALMINI lift on also. I still haven't been able to get the front end up as high as it should. If you look at the front compared to the rear, the rear looks much higher. I had new cv's put on when I installed the half-shafts. It's getting in the season where I hate to break into things during the butta$$ cold weather. That's Iowa for ya. Good luck & HAPPY NEW YEAR! :oops: -alcohol- :oops:

What a dip sh*t! You gotta love the dealerships! I just replaced mine with the CALMINI Lift. Two per UCA!

Hey 88, I know there would be some custom fitting, but how would you know which model to go with for the size? Try Toyota, JEEP Cherokee, Explorer or what? Hey Grim, How about some pic's of your rear bumper and swing away? Speaking of using parts from other vehicles... 88, you are a junkyard junkie....if I happen to run across or want to run across some manual locking hubs for my Pathy, what trucks should I be looking for and how will I know what will fit my Pathy? Thanks for the info everyone!

Hey slick! Where did you find those bumpers from the Yota? Junk yard or what & how much did they run? Post pic's once you have them installed/ Thanks!

I haven't seen any on Pathy's, but does anyone have a clue! I was looking through a Quadratech catalog and some other off-roading mags the other day and I saw some tubular rear bumpers with a hitch fabbed with-in the bumper. I think these look sweet. Kill two birds with one stone. Does anyone have any idea on what something like this would run &/or have you seen any of these on Pathy's? I'm thinking about looking for a local fabber and see what they could do for me. Any thoughts or concerns would be appreciated!

Ooops, This is a different guy than I was thinking of..... Can anyone figure out how much lift this guy has on that thing? I keep looking @ it and D@MN! That thing is HUGE!

Daadaadaa D@MN! That is one sweet high ride. Can you say BUCKS! I remember reading some forums from him on the AC site. The guy rolled his truck and was using a doner for spare parts if I remember right. I would have one big attitude if I was behind that wheel!

:furious: Talk about a pain in the butt! I received my CALMINI lift kit and I'm 3/4 the way done with the install. I'm waiting for new spindles for the upper control arms! Yes, I said the spindle. I hate individuals that don't take care of their vehicles. It took me forever to get the darn uca's off and trying to get the darn spindles out of the original uca's to use for the new uca's.......after heating them up with a torch and beating the hell out of them, they are useless. I ordered new ones from the Nissan dealership. Yes, you read it right! I needed to order new ones, which were $50.00 a piece. I'm hoping to get them on Thursaday and finish the darn lift. Once done, I'll take pic's and post. Again, I hate it when people don't take care of their vehicles. The frame is going to get a complete coat of POR15. The rear passenger side frame is rusting! Two bolt size holes rusting through now. :sniff: Keep Lifting higher & higher.

Hey Runnerman, If it helps at all, I can take a digital pic of my crossmember and post it or email you the pic if it will help? I have a 94. Just curious & willing to help out if at all possibble. :cool2:

Hey Slick! When are you looking to getting your bumper done? Take some pic's and I bet your bf's buddy could make some cash from some of us! Win Win situation! :cool2:

YEah, that's his. I believe he has a 4"Trailmaster suspension with a 3" body lift on 35's or 36's. That's what I'm shooting for, but with a 3" CALMINI lift and 3" body lift on 33" or squeeze 35's in.

My 94 has around 210,000 miles and still running strong. The only things engine wise I've replaced is the plugs, knock sensor, and battery. Not too shabby!

:furious: Since we are bashing JEEPS, how about this one? I saw this saying on the net somewhere...."Yeah, I got your JEEP Thing, and it hurts to pee." I think I'm going to get some window stickers with this saying. Maybe this one too..."No, I don't have your JEEP Thing, I have something Better." What do ya think? Let's figure out more and get them made!

:bow: Supporting the TROOPS! Congrat's on the Marriage thing! Life goes to s*#t after! Just kidding I've been with my wife for 6 yrs married and over all 11 yrs. I hope you enjoyed the Honeymoon! Good luck and GOD BLESS for a safe return if you are departed over to the sandbars!

The 1" lifts I think are hockey pucks! I mess around with other guys about body lifts. I just tell them to use hockey pucks! I love it!

I'm getting ready to order my CALMINI Kit Monday morning! -bounce- I think I will reindex my torsion bars and maybe sell them cheap to someone that won't have a clue! Hoping to get it by Wed. and have it installed by Thurs or Fri.

Thanks for the info. I'll try it and hope it will save me the money on new torsion bars. Expect more questions, since I've never dealt with this before. If this works, the only thing I will have to purchase is the upper control arms and shocks. Thanks amillion!