new4x4r

Hahaha sorry dudes. I'll take more pictures... heaven forbid you should use that thing on your shoulders. Yeah just bend a couple pieces of tin and use... f*ck it, I'll post pics

F*ck the Sh*t pipe! Buy pre-bent pieces of 3" exhaust pipe and bedline it! It "looks" like something you have bought but it WAAAAY stronger and isn't made to shuttle pieces of poop and tampons into the earth... jeez

You can probably get the pieces off eBay. I just went to a shop and bought a mandrel 90, a 3 foot straight and a 45. Welded them all together. Put some 1/16 tabs on it. The piping inside is justmarine exhaust tubing. Its very simple.

Spring break?! You've got it backwards DUDU, you're supposed to go south! Thanks buddy, I'm gonna check my parts wholesaler here to see what my damage is going to be.

3" exhaust pipe, some bedliner and a Precleaner.

I've got an american address. Just can't be bothered going to Advance auto parts myself. I'm gonna check with my wholesaler and see what they are. Problem with Rock Auto, is they're out to lunch with their shipping rates.

Hey dudes, Wheres the cheapest place to get O2 Sensors? Do I go Bosch? or chinese? Does it really matter?

You got my vote BUDDAY!!!!

I wanted to see the wheelin' day with the Real Hummer, Pathy and Frontier

Nice man! Pics would be wicked!

How do you live 5 mins from me and I've never seen you? Bumper looks good man, get rid of the Obscenely large washer fluid tank. Buy a smaller one from Canadian Tire and mount it under the battery. NISSAN TRUCK MEET NIAGARA GATEWAY!!!!!

HAHAHAA I Was waaay off. Not even 4.6... 4.3's, I'm too tired to be associating with humanity! I had the tallest gears. And had no noticeable power loss.

Yep. 35's no problems at all. I had the 3.6 gears too. No issues because of the diameter change

I had a vibration when I did the SFD, and 35's. I changed my rack bushings, CV's and Strut mounts....Turned out it was just my rotors... (D'oh) 40 bux later and I was good to go. Simple answer but sometimes overlooked.

I've got one here... but, I'm a little far. I shipped both front and rear to PAMountainbiker a while back. But I don't remember what it cost as far as shipping goes. Probably not worth it though. You'll be able to find one in a wrecker near you. Being that there isn't much problem with rust in your area (you lucky F@cker) there should be a few that haven't been crushed

WELD IT!!!! Last time I checked, this was Nissan Pathfinder OFF ROAD Association. Offroading is for those who love adventure, and whats more adventurous then diving head first into the unknown? And the feeling you get knowing you did something someone else has? Sweeeet! Not to mention all the guys following this thread will feel better about trying it after you giver a go! DO IT!!!

Do it!!! If it doesn't work, grab another diff. from a wrecker. I've been driving with a Spooled front end for a year now. Its a night and day difference in traction.

I use limit straps!! X-D

Hey dudes, I've got another parts truck for those of you that need stuff http://www.nissanpathfinders.net/forum/topic/34078-silver-98-pathfinder-chilkoot-part-out/

VERY NICE MAN!!! I did the same thing!!! I use my for everything with no issues *thumbs up*

Yeah the front's need a bit more trimming, mainly so they don't look like a "Beer and Rage fueled Rod" molested them with a 7" angle grinder hahaha

Hey dudes! Got some new tires. 36x13.5x15 Interco Iroks. A noticeable difference from the 35's (being that the 35's were worn down to 34) There are WAY quieter on the road. No balancing issues, I use Magnum Balancing beads (11 OZ per tire) and they work AMAZINGLY. I'll post pics and video of them being put to work on our trip next weekend

Nice man! I'M EXCITE!!!

Looks good man!!! You getting rid of the charcoal can?

Ohhh man, the only coilover with skidmarks on the tube are... FOA!!!! BOOOOOOO