Leaderboard

Camping trip with @micahfelker and a really nice taco (tube bumpers f/r, sliders, 33 M/T’s & factory rear locker)

Right under the Nissan emblem Sent from my iPhone using Tapatalk

Looks factory! Nicely done.

Mounted mine in the center of my spare tire carrier so it is looking out of the center of my wheel. Works well enough over the last 15 or so years. Would be nice to have a lower one that can see my hitch for when I need to hook up to a trailer though.

My 93 came with the factory fog lights installed before I bought it in 99. I suspect they were factory installed rather than dealer since it was a loaded SE. The web in the plastic insert was cut out to fit the lights and there was a pair of plastic trim covers to finish each end of the light if I recall correctly. You will need the 93-95 Pathfinder bumper mounting brackets as well to attach the bumper to the truck. You will also need the fog light mounting brackets if they are not included with the lights. If they are replacement lights, probably won't have them. I don't recall exactly but I think there was a small fender extension that attached to the bottom of the front fenders at the bottom to match up to the steel valence/trim under the front bumper. All that I removed many years ago from mine when I lifted my truck and built a front skid plate that has proven to be serious overkill. As has been said, the bumpers are light and pretty much decoration. If you are willing to spend a little more and put in some work, a custom or aftermarket off road bumper would be good way to go.

Nice! Looks to be a perfect spot.

Very nice!! Good job.

Sent from my iPhone using Tapatalk

Also, I believe those useless plastic hooks pass through as well. You could feed it through one of them or pull the plastic & put a grommet in.

Had a little fun over the holidays. Hope the New Year is going well for everyone. Oh and be careful out there lol.