Jump to content
  • Sign In Changes:  You now need to sign in using the email address associated with your account, combined with your current password.  Using your display name and password is no longer supported.

 

  • If you are currently trying to register, are not receiving the validation email, and are using an Outlook, Hotmail or Yahoo domain email address, please change your email address to something other than those (or temporary email providers). These domains are known to have problems delivering emails from the community.

Leaderboard

Popular Content

Showing content with the highest reputation on 11/29/2020 in all areas

  1. Wilco Hitchgate spare tire carrier finally arrived. I went with the high clearance model. It isn’t cheap but it’s well designed and built like a tank. The spare tire relocation bracket and Rotopax mount bracket (which mounts between the tire and rear hatch) is still backordered but I’ll post pics when those arrive.
    1 point
  2. If there's flakes, rebuild it or replace it. 2000-2004 Xterra, 1990-2000 pathy 1998-2004 frontier all fit.
    1 point
  3. Its been a while since anyone posted here, but I ran into the whole no heat issue recently and as winter is here I figure this info could be useful. After verifying I was getting coolant flow through the heater core it became pretty obvious I had a problem with the mixer door not actuating back to the hot side. I removed the glove box and the metal plate behind it. Just left of this opening is the servo and linkage for the mixer door. As I have no intention of using cold air through winter, I simply disconnected the linkage from the servo and pulled it to the passenger side of the vehicle. This put the mixer door into the heater side and I have heat again. Obviously this is just a temporary fix, but it will get you defrost again... Oh,, this was a 1990 pathfinder 4x4
    1 point
×
×
  • Create New...