Leaderboard

Daytripping in the Cascade Foothills with@TowndawgR50

Are you planning on OME HD front springs PLUS a 1" spacer? That might end up pushing it as you'll see. I currently run OME HD front springs plus a 0.5" spacer and I found that was the max I could go. That was after a year of letting the OME HD springs settle out first.

So this past week has been quite eventful ...Started working on the all Gaskets Seals Step 1 Remove Air Intake not having the bulky OEM Air box etc ahhh makes life so much more easier Throttle Body Before & After Hopefully no one kicks the bolts/screws over, bc that's the order they have to go back LOL Intake manifold collectors YUCK! Before & After Cleaning The Infamous Screws Valve Covers Off! For a truck that drove good, i'm glad i did them. It seems like the dealer tried to hide stuff but using silicone on the Spark Plug Seals Ekkk. VC arrived Beck/Arnley, open them up and what do you know they are OEM NISSAN Score! $530 CDN all in with shipping from Rock auto to Vancouver Outside box Inside box Did Both the thermostat and water valve, drained the coolant since everything was apart next. i didn't remove the fuel line/injectors, did it somewhat blind in a tight spot but still managed. Decided to not go any further down, still have the Rear main seals etc to do. Cleaned the Intake manifold from above and used air pressure to shoot it back up and dry. New Valve Covers back on..have to go to Nissan to get those blow by breather hoses since they were hard as a rock As for now just waiting for our long weekend to be over so i can grab couple more hoses for the lower manifold and finish also probably slap on new drive belts too while I'm at it, since i have them already............future plans is to basically installs these finally one day LOL Kick back and enjoy to be contnued

Sunday Drive up north mendocino count

Here’s a pic with the new tire carrier on, I had welded the mechanism from an older pathfinder carrier because the original was not there but it seems to be fine Sent from my iPhone using Tapatalk

Free campsite outside of Hatch, Utah Sent from my iPhone using Tapatalk

Poison mtn! Sent from my iPhone using Tapatalk

1st time towing since the LR9449 install. Handles way better but I now need a drop hitch. Lol

Refurbished the front clip on my 96LR50 including radiator support. I’m really happy the way it turned out. Not bad for a 24 year old vehicle. Sent from my iPhone using Tapatalk

Looks good!, I got Stuck in sand about a week ago, but I mean I forgot to air down so I messed up [emoji23] Sent from my iPhone using Tapatalk

The other week up near Nahatlach! Sent from my iPhone using Tapatalk

New addition to the family Four months later - overhauled, lifted and dressed up