edinleth Posted August 2, 2020 Share Posted August 2, 2020 Im looking for bushings for upper and lower track bars for my pathy. And I was wondering if the upper and lowers were the same size? if anyone could point me in the right direction of some websites that have them, that would be wicked. Preferably Canadian sites but I'm willing to pay extra on shipping. Thanks Sent from my SM-G955W using Tapatalk Link to comment Share on other sites More sharing options...
Mr_Reverse Posted August 3, 2020 Share Posted August 3, 2020 Just replaced some of mine recently, but can't recall the PN. All. 8 bushings are the same. I got mine through Amazon, though I think your local parts store should be able to get them as well. I have pretty much given up on the things in my Pathy, considering building new links and using Jonny joints or something similar when I can find the extra money and interest to work on my truck again. Currently looking for a transmission for the 09 Altima I bought cheap a couple weeks ago and fixing the neglected and worn out stuff in my DD, the 04 Sorento my daughter gave back to me a month ago. Link to comment Share on other sites More sharing options...
adamzan Posted August 5, 2020 Share Posted August 5, 2020 https://www.rockauto.com/en/catalog/nissan,1995,pathfinder,3.0l+v6,1211993,suspension,control+arm+bushing,7532 They are the same for a 1990. What you want is the rear control arm bushings. Here are the ones for the panhard/track bar (the one that goes from the frame on the right to the axle on the left): https://www.rockauto.com/en/catalog/nissan,1995,pathfinder,3.0l+v6,1211993,suspension,track+bar+bushing,10416 1 Link to comment Share on other sites More sharing options...
TheGhost Posted January 11, 2021 Share Posted January 11, 2021 On 8/2/2020 at 4:11 PM, edinleth said: Im looking for bushings for upper and lower track bars for my pathy. And I was wondering if the upper and lowers were the same size? if anyone could point me in the right direction of some websites that have them, that would be wicked. Preferably Canadian sites but I'm willing to pay extra on shipping. Thanks Sent from my SM-G955W using Tapatalk On 8/4/2020 at 7:17 PM, adamzan said: https://www.rockauto.com/en/catalog/nissan,1995,pathfinder,3.0l+v6,1211993,suspension,control+arm+bushing,7532 They are the same for a 1990. What you want is the rear control arm bushings. Here are the ones for the panhard/track bar (the one that goes from the frame on the right to the axle on the left): https://www.rockauto.com/en/catalog/nissan,1995,pathfinder,3.0l+v6,1211993,suspension,track+bar+bushing,10416 @Mr_Reverse How is the install of these? I've got a crazy sway in the rear end when I let on/off the gas at speed, especially corners. Thinking of trying to replace the trailing/control arm as well as panhard/track bar bushings. Link to comment Share on other sites More sharing options...
gamellott Posted January 11, 2021 Share Posted January 11, 2021 @TheGhost With a cursory visual inspection, you can easily determine if you have bad bushings. I would have a look at everything though, not just your rear end. At one point, I had, what turned out to be, a complete idiot do a front end alignment on my pathy. One of the upper control arm bolts was cross threaded and not tight against the frame. What happened later, because it wasn't tight against the frame, the shims fell out and I had an upper control arm that was flopping around causing all kinds of mayhem while driving. I recommend a good look over everything!! 1 Link to comment Share on other sites More sharing options...
adamzan Posted January 19, 2021 Share Posted January 19, 2021 (edited) The install is not fun, I had to burn mine out and cut the sleeves. The new ones pressed in fairly easily, though. It did make a considerable difference in how it drove. As well as fixing the sway/torque steer problem. I also agree with @gamellott and check out the front end as well. It can cause all sorts of other symptoms. Most common issues are worn idler arm and center link. And yes the alignment is frequently done improperly especially if they play with the caster/camber. Edited January 19, 2021 by adamzan more info 1 Link to comment Share on other sites More sharing options...
Clembs Posted February 9, 2021 Share Posted February 9, 2021 hey adamzan the link for the panhard bushings that you posted from Rockauto. Do I need 2 sets or are there just one cone bushing and one round (like control bush) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now