goldeneye123454321 Posted May 10, 2009 Share Posted May 10, 2009 Ok, I just figured out that i burned out one the fusible links onmy car. In particular the green one from the battery that seems to go the the ignition system. Does any one know what the specs for the green fusible link wire might be? thanks Link to comment Share on other sites More sharing options...
MY1PATH Posted May 10, 2009 Share Posted May 10, 2009 I belive its 14awg I think I replaced mine with 12awg not sure if that was a good idea or not. Link to comment Share on other sites More sharing options...
GrimGreg Posted May 11, 2009 Share Posted May 11, 2009 Why I usually yank the ones I find in J-yards to keep around. Haven't neede one yet, but hear enough stories on the boards to keep extras. Link to comment Share on other sites More sharing options...
RedPath88 Posted May 11, 2009 Share Posted May 11, 2009 Not sure what size wire, but I replaced mine a long time ago with one from the dealer, it was only around $14usd. Link to comment Share on other sites More sharing options...
Simon Posted May 11, 2009 Share Posted May 11, 2009 Bah.....I hacked out the links, and hard wired them to a new + terminal. Much more secure, and no issues. Link to comment Share on other sites More sharing options...
GrimGreg Posted May 11, 2009 Share Posted May 11, 2009 Bah.....I hacked out the links, and hard wired them to a new + terminal. Much more secure, and no issues. Until a short develops and melts your entire harness, rather than the 2" fusable link wire. Link to comment Share on other sites More sharing options...
AkGold Posted May 14, 2019 Share Posted May 14, 2019 Anyone know what exactly gets power from the fusible link? I have several wires coming out and would like to know what they power if anyone here does . Thanks Link to comment Share on other sites More sharing options...
Mr_Reverse Posted May 14, 2019 Share Posted May 14, 2019 Everything goes through the fusable links.my 93 SE has a total of 6. 3 brown, 1 green, and 2 black. One of the black ones is a short loop by itself. The black and the green ones are a unit and the 3 brown ones are a separate unit. They protect all the wiring harnesses from a catastrophic thermo event from happening. I don't recall where, but I had found a Nissan Z forum where someone had the specs for the various link wires and had converted to modern style links using maxi fuses I believe. I might go that route myself some day when I feel like messing with my wiring again. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now