Runnerman Posted May 1, 2007 Share Posted May 1, 2007 Hey guys!!! I am not gone and will be back up running full tilt in August. Have to say that since last July I was thrown a pretty big wrench. All is starting to get back to normal and I will be running Full throttle soon! I will be back Bigger and Better!! Any questions feel free to ask them. Yes I have to do things on the low down for now, but I do still fill orders and with word of mouth I have been quite busy still. Pathy's are where I started and this is where my roots are. So I will continue to work on different products for our pathfinders. FYI shipping to the Southern states is probably going to run you about 50-60 or more. Like always I do try to do my best and find the cheapest route on shipping. However if anyone knows or can get me an inside scoup on truck frieght shipping would be great!! This way when I get my bumpers going I can actually send them out. Along with the sliders. Thanks, Marcel Miller BlackPanther Armor Link to comment Share on other sites More sharing options...
Simon Posted May 1, 2007 Share Posted May 1, 2007 Good to hear, Marcel. Hope things keep on the upswing for you. Now where's Pezzy's Z-bracket for her tcase skid!!! Link to comment Share on other sites More sharing options...
Runnerman Posted May 1, 2007 Author Share Posted May 1, 2007 Good to hear, Marcel. Hope things keep on the upswing for you. Now where's Pezzy's Z-bracket for her tcase skid!!! Ya sent it out snail mail this time. Funny put it in with another customers order for other plates. haha anyhow I knew I packed it I guess I just didn't know where Link to comment Share on other sites More sharing options...
Simon Posted May 1, 2007 Share Posted May 1, 2007 Thanks Marcel. No worries, I was just giving you a hard time. Link to comment Share on other sites More sharing options...
Runnerman Posted May 1, 2007 Author Share Posted May 1, 2007 I know coming from that crazy province right beside me Link to comment Share on other sites More sharing options...
Pezzy Posted May 1, 2007 Share Posted May 1, 2007 Good thing those lakes keep us far apart! Good to hear things are looking up for you Marcel! Link to comment Share on other sites More sharing options...
k9sar Posted May 1, 2007 Share Posted May 1, 2007 Glad to hear you're making a rebound Marcel. Your skids have saved my butt more than once so far. If you need any info on WD21 applications (including things that I had to do for installation), just let me know. Scott Link to comment Share on other sites More sharing options...
Runnerman Posted May 1, 2007 Author Share Posted May 1, 2007 I forgot also to say here. If anyone has questions about my products or anything else let them fly? And I'll let you know. Thanks to all of my customers Link to comment Share on other sites More sharing options...
nige Posted May 1, 2007 Share Posted May 1, 2007 (edited) Hey Marcel, have you considered making skidplates from UHMW plastic? I hear they are lighter than steel and just as strong. Edited May 1, 2007 by skrillaguerilla Link to comment Share on other sites More sharing options...
93PathfinderWA Posted May 1, 2007 Share Posted May 1, 2007 Hey good to hear things are getting better. Are you planning to get a website going again soon. How much is it for a full set of skids shipped to Western Washington, powder coated or not? Thanks, 93 Link to comment Share on other sites More sharing options...
McClurgM Posted May 1, 2007 Share Posted May 1, 2007 Marcel - Glad things are on the up and UP! Count me in on the full set of skids!!! PM me payment instructions if you would please. thank you! Matthew Link to comment Share on other sites More sharing options...
Runnerman Posted May 2, 2007 Author Share Posted May 2, 2007 Hey Marcel, have you considered making skidplates from UHMW plastic? I hear they are lighter than steel and just as strong. Nope I won't do plastic. I work with steel and that is my expertise. I'll leave the plastic plates to the other guys. I do however want to start expanding into products after I get my CNC Mill/Drill next year. So who knows what I'll be getting into . This up and coming year will be good 1 and first off to finish up your guys bumpers for those pathy's. After July. Link to comment Share on other sites More sharing options...
csutke Posted May 2, 2007 Share Posted May 2, 2007 (edited) glad to see ya back in the swing of things again. So you make sliders as well? how much for an R50 Edited May 2, 2007 by csutke Link to comment Share on other sites More sharing options...
Slick Posted May 2, 2007 Share Posted May 2, 2007 good to see you're still around and getting things back in order. i want some BP skids, but $$ is tight. *dreams* one of these days....... Link to comment Share on other sites More sharing options...
sammyb33 Posted May 3, 2007 Share Posted May 3, 2007 actually i would love to see pictures of someones WD with the BP tranny tcase skid PLZ.....this wiill determine whether or not ill get one Link to comment Share on other sites More sharing options...
yar1 Posted May 5, 2007 Share Posted May 5, 2007 whats the price for a full set for a r50? Link to comment Share on other sites More sharing options...
93PathfinderWA Posted July 26, 2007 Share Posted July 26, 2007 Hey since it is almost August and I might have some money to spend soon I was wondering if BP Armor was still going to be back into full production. Anyone have any updates? Link to comment Share on other sites More sharing options...
Simon Posted July 26, 2007 Share Posted July 26, 2007 PM Runnerman for details. I do believe he's still in business. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now