lowrider Posted January 12, 2006 Share Posted January 12, 2006 I need to build a new front bumper for my truck. doesn't need to hold a winch, just look decent, protect the front end well, and have good tow points. any suggestions? post pics!!! Link to comment Share on other sites More sharing options...
unccpathfinder Posted January 12, 2006 Share Posted January 12, 2006 go to a junkyard and pull some tow hooks off of a pathy and mount them in the stock holes... and possibly build something like the ARB's just with ure own twist or taste for ure truck... Link to comment Share on other sites More sharing options...
neri33 Posted January 15, 2006 Share Posted January 15, 2006 (edited) I need to build a new front bumper for my truck. doesn't need to hold a winch, just look decent, protect the front end well, and have good tow points. any suggestions? post pics!!! hello, send me a e-mail, i have the blue print for front bumper. My mail is neri_genaro@hotmail.com Edited January 15, 2006 by neri33 Link to comment Share on other sites More sharing options...
neri33 Posted January 15, 2006 Share Posted January 15, 2006 hello, send me a e-mail, i have the blue print for front bumper. My mail is neri_genaro@hotmail.com otra Link to comment Share on other sites More sharing options...
Filthy Luker Posted January 16, 2006 Share Posted January 16, 2006 That looks very similar to JPs bumper: Link to comment Share on other sites More sharing options...
sw Posted January 16, 2006 Share Posted January 16, 2006 wow they look schweeeet! Link to comment Share on other sites More sharing options...
Slick Posted January 17, 2006 Share Posted January 17, 2006 :eek: *hearts all around* can i have that HB??? :bow: :bow: :bow: :eek: Link to comment Share on other sites More sharing options...
Casey.T Posted January 17, 2006 Share Posted January 17, 2006 Thats a AWESOME Bumper :o I need 2 Neri33 I also sent you an email Link to comment Share on other sites More sharing options...
neri33 Posted January 18, 2006 Share Posted January 18, 2006 That looks very similar to JPs bumper: yes it is i take the model from jp's and adjust to my path because the front on path is not flat (i think in hb no flat to). i have more details bumper (front and back) for construction regarding my experience when made it the back bumper is just my design, (I don't saw other like my back bumper) Link to comment Share on other sites More sharing options...
neri33 Posted January 18, 2006 Share Posted January 18, 2006 (edited) made in mexico Edited January 18, 2006 by neri33 Link to comment Share on other sites More sharing options...
neri33 Posted January 18, 2006 Share Posted January 18, 2006 adjust bracket Link to comment Share on other sites More sharing options...
neri33 Posted January 18, 2006 Share Posted January 18, 2006 finish bakc bumper Link to comment Share on other sites More sharing options...
neri33 Posted January 18, 2006 Share Posted January 18, 2006 on trail 1 Link to comment Share on other sites More sharing options...
neri33 Posted January 18, 2006 Share Posted January 18, 2006 on trail 2 Link to comment Share on other sites More sharing options...
Harbinger Posted January 18, 2006 Share Posted January 18, 2006 Those look awesome! Is that a chopped xterra roof rack I see as well? Link to comment Share on other sites More sharing options...
tbecktold Posted January 18, 2006 Share Posted January 18, 2006 I love JP's HB. Not many people have the know-how or balls to turbo the 4banger and add fuel injection, then swap to an Isuzu drivetrain along with an sas at the same time...way cool. As to bumpers, I've always been partial to this bumper. He used to hang around n4w as orange4ska. When I build a bumper for the HB it will end up something like his: Link to comment Share on other sites More sharing options...
Casey.T Posted January 18, 2006 Share Posted January 18, 2006 All I have to say is wow on both... I have not played with the rear as of yet but it looks awesome too :cool2: I will have the Front into a Sheet Metal shop 1st thing in the morning.... any chace of the bp on the rear? And as I said in the email... Let me know if I can help out with something here in the States Link to comment Share on other sites More sharing options...
Filthy Luker Posted January 18, 2006 Share Posted January 18, 2006 I love JP's HB. Not many people have the know-how or balls to turbo the 4banger and add fuel injection, then swap to an Isuzu drivetrain along with an sas at the same time...way cool. As to bumpers, I've always been partial to this bumper. He used to hang around n4w as orange4ska. When I build a bumper for the HB it will end up something like his: Yea.. I have mixed feelings on it. I love the worksmanship and the sheer beauty of the bumper, but for myself I am going to make something with a bit more of approach angle to complement my low ride height Which brings me to the cool rear one that neri33 did. It seems quite a bit larger than a stock bumper, do you find that it cuts away from your departure angle? I find that my spare tire is my limit right now, and I want to relocate it higher and closer to the truck because i tend to drag it everywhere I go. pssd Also there doesn't seem to be a way of using a Hi-Lift on anything but the front of the vehicle... is there something hidden you've devised? I've seen angled rocksliders tha have Hi-Lift ports to lift up the truck. Is that what the holes are for in the rear? :confused: Link to comment Share on other sites More sharing options...
unccpathfinder Posted January 18, 2006 Share Posted January 18, 2006 hey neri is that solids works? if not what software did u use to draw that in? btw that looks sweet i want 1 haha Link to comment Share on other sites More sharing options...
transworldmoto Posted January 18, 2006 Share Posted January 18, 2006 so where do i send this check to for both bumpers? lol good stuff man i definitely want one in white for my new '90 Link to comment Share on other sites More sharing options...
neri33 Posted January 19, 2006 Share Posted January 19, 2006 (edited) Harbinger: I like a lot the xterra but to spence to me, the roof rack always like it and design same model for pathfinder pic1 machined brackets with basket unccpathfinder: if you use solidworks or pro-e software, I can send you the files to simulate in your computer Filthy Luker: the back bumper is more large than stock, I cut 3" of original design for better angle, and put JGC coils and custom base to avoid cut pigtail and I have 4" lift on back, the holes are for fog lamp but I have a problem with transmision to connect it when put reverse. detail light transworldmoto: I can't help with the construction of this, I don't know weld, but the cost is aroun 400 dlls plus ship, if you know weld or there is a shop near your location, I can send you the blue print, i think the cost is same but you save the shiping and add some modification. Edited January 19, 2006 by neri33 Link to comment Share on other sites More sharing options...
Vsicks Pathy Posted January 19, 2006 Share Posted January 19, 2006 That looks very similar to JPs bumper: He has got pathfinder corners on and they look sh!t. The bar on the otherhand looks good. Link to comment Share on other sites More sharing options...
SkinnyPedal Posted January 20, 2006 Share Posted January 20, 2006 hello, send me a e-mail, i have the blue print for front bumper. My mail is neri_genaro@hotmail.com Email sent! I am in desperate need of a new rear bumper after this: ...and I really dig your design. :bow: I'd love to know how many hours you put into building this thing! Link to comment Share on other sites More sharing options...
FLApathy Posted January 20, 2006 Share Posted January 20, 2006 (edited) He has got pathfinder corners on and they look sh!t. u gotta be kiddin me Edited January 20, 2006 by FLApathy Link to comment Share on other sites More sharing options...
transworldmoto Posted January 20, 2006 Share Posted January 20, 2006 v6, youre very blunt, but you get your point out there. i on the other hand like jp's bumper and neri's design as well. i think i'll try my hand in fab if i get the new pathy ('90). Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now