PATHRIDER Posted January 11, 2011 Share Posted January 11, 2011 Hey guys looking for the thread on how to upgrade a pathys idler arm with a beefier donor steering box from a hardbody truck...Seen a couple of steering box at a local jy this morning and couldnt quite remember what year hardbody or truck steering I can pull the donor from. I seen one off of a 91 and a 87 I beleive thats just hangin so I figured pull em now and probably do my upgrade when the weather permits. Been searching for hours and couldnt find it..Thanks in advance for your help fellas Link to comment Share on other sites More sharing options...
5523Pathfinder Posted January 12, 2011 Share Posted January 12, 2011 They are in the How To section.... http://www.nissanpathfinders.net/forum/index.php?showtopic=23222 Might also wanna do some searching. MY1PATH did this and had some photos also, IIRC. Link to comment Share on other sites More sharing options...
DavefromOZ Posted January 12, 2011 Share Posted January 12, 2011 This one? CLICKY Link to comment Share on other sites More sharing options...
5523Pathfinder Posted January 12, 2011 Share Posted January 12, 2011 Great minds think alike! Nice timing Dave! Link to comment Share on other sites More sharing options...
PATHRIDER Posted January 12, 2011 Author Share Posted January 12, 2011 You guys are awesome..Thanks..Good thing I asked first before pulling one out coz the one I saw at the jy is powered Link to comment Share on other sites More sharing options...
madhornet Posted January 12, 2011 Share Posted January 12, 2011 i used a powered one just took a few min and removed the guts and made and siliconed a plate over the hole non powered units are almost impossible from here in altlantic canada i havnt seen one in almost 15 years Link to comment Share on other sites More sharing options...
Channel595 Posted January 19, 2011 Share Posted January 19, 2011 just make sure that the one you pick has the right sized pitman arm and sometime the taper for the ball joint is reversed from the 4x4 pathfinder Link to comment Share on other sites More sharing options...
GrimGreg Posted January 19, 2011 Share Posted January 19, 2011 just make sure that the one you pick has the right sized pitman arm and sometime the taper for the ball joint is reversed from the 4x4 pathfinder You have to change the arm if you use the non-powered box. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now