Jump to content
  • Sign In Changes:  You now need to sign in using the email address associated with your account, combined with your current password.  Using your display name and password is no longer supported.

 

  • If you are currently trying to register, are not receiving the validation email, and are using an Outlook, Hotmail or Yahoo domain email address, please change your email address to something other than those (or temporary email providers). These domains are known to have problems delivering emails from the community.

Spark Plugs


Recommended Posts

Hi all. Can I please get advise on Spark Plugs. My mistake, I bought some NGK plugs No BKR6EIX / .032 gap. These are for a VG30E / 1990 model. Question. Can I use these in my VG30I 1989 motor ? .NGK list plug BCPR5EIX-11 with a .044 gap for this motor.Being in Australia they cost a lot and I would like to do a service before XMass.The Auto store will not exchange or return them. Will the different plugs affect the running ?

Link to comment
Share on other sites

I advise against using Iridum and platnum plugs on the VG. These old engines do just fine on plane ol copper core plugs because they have a very strong igniton system.

BKR6EY (plain V-power) will work on both vg30e and vg30i. You can gap it to .040~.042

Link to comment
Share on other sites

I would get the correct spark plug. The two you mentioned have a different gap, heat rating and I don't know about the length. Gap is .044"

http://www.ngksparkplugs.com/part_finder/index.asp?mode=nml

 

No harm in running platinum alloy plugs other than the price, they may even last longer. While the V power are OE parts, they list different heat ranges for the I and E engine designations and I tend ti follow the recommendations.

Yes, the ignition system is quite strong. My first 95 ran without a center electrode in the dizzy cap; the spark arced from the center spring down to thr rotor on demand... :blink:

 

B

Link to comment
Share on other sites

I used the ngk G-power plugs and it runs great and gets decent mileage. That is what came out of the truck so that is what I put in. The set that was in there lasted 80,000kms (of my driving, who knows how old they were) before I had any issues.

 

I remember when Brandon and I did our plugs on the same day and he had the basic ngks. He noticed a big difference.

 

http://www.ngksparkplugs.com/products/spark_plugs/gpower.asp

Link to comment
Share on other sites

  • 3 weeks later...

The TBIs tend to need a hotter plug, the 5Es, for complete combustion. The MPFIs can get away with using 6Es.

 

that exactly right but if its a big diff in price it will not hurt anything its ok to go colder from 5 to 6 but u would not want to go 6-5 6 being a colder plug

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...