morpheus Posted March 6, 2009 Share Posted March 6, 2009 I have access to a supply of 1" aluminum strut spacers. Spacers are currently $200/pr (CAD) including hardware (Approx $160 USD) or $370/pr (CAD) including hardware, upper strut mounts and bearing. (Approx $290 USD) Plus applicable shipping. PM me if interested, or email me at mikethomson@northendnissan.ca Link to comment Share on other sites More sharing options...
tekazgtr1984 Posted March 6, 2009 Share Posted March 6, 2009 Where abouts are you located for shipping these? I might be interested sometime in the spring. Link to comment Share on other sites More sharing options...
laxman0324 Posted March 6, 2009 Share Posted March 6, 2009 I'm sorry, but $160US is wayyy too much, drawings can be found and its easy to make your own if you take the strut off...hell I am considering using the spacers I have and making a CAD drawing...maybe $100 or so is more reasonable... Link to comment Share on other sites More sharing options...
tekazgtr1984 Posted March 6, 2009 Share Posted March 6, 2009 I'm sorry, but $160US is wayyy too much, drawings can be found and its easy to make your own if you take the strut off...hell I am considering using the spacers I have and making a CAD drawing...maybe $100 or so is more reasonable... I never considered what the price should be. Oops... Thanks for the advice, Mike! Link to comment Share on other sites More sharing options...
FUELER Posted March 6, 2009 Share Posted March 6, 2009 if you can find them for $100 then buy them. problem is you cant find them for that price. I sold several of these spacers for $160 a pair, thats a good going rate for a hard-to-find part. Link to comment Share on other sites More sharing options...
new4x4r Posted March 6, 2009 Share Posted March 6, 2009 (edited) Theres no way you coud get aluminum spacers made for $100 Edited March 6, 2009 by new4x4r Link to comment Share on other sites More sharing options...
laxman0324 Posted March 6, 2009 Share Posted March 6, 2009 Theres no way you coud get aluminum spacers made for $100 When Tyler first made them he sold them for $125 with all hardware. It has and will be done again. Link to comment Share on other sites More sharing options...
new4x4r Posted March 6, 2009 Share Posted March 6, 2009 awesome, in this case.. I like being proved wrong :-D Link to comment Share on other sites More sharing options...
vengeful Posted March 6, 2009 Share Posted March 6, 2009 I'm sorry, but $160US is wayyy too much, drawings can be found and its easy to make your own if you take the strut off...hell I am considering using the spacers I have and making a CAD drawing...maybe $100 or so is more reasonable... PM me. Link to comment Share on other sites More sharing options...
laxman0324 Posted March 6, 2009 Share Posted March 6, 2009 awesome, in this case.. I like being proved wrong :-D http://npora.ipbhost.com//index.php?showto...t=0&start=0 Check that out for info...of course I am sure the prices have gone up since, but $160 is a bit much I think. I got mine for 100+shipping with all hardware from another user. The reason Fueler has gotten so much for his is because he must be a good salesman. Link to comment Share on other sites More sharing options...
vengeful Posted March 7, 2009 Share Posted March 7, 2009 http://npora.ipbhost.com//index.php?showto...t=0&start=0 The reason Fueler has gotten so much for his is because he must be a good salesman. Or something else...I recall that he bought them from Tyler for the same deal you got Mike...What a joker. Link to comment Share on other sites More sharing options...
morpheus Posted March 7, 2009 Author Share Posted March 7, 2009 I'm sure I could get a better deal if I committed to maybe 10 pairs at a time instead of 1 pair at a time, but I'm not willing to chance getting stuck with them. Also, don't know what the others were made out of, but these are aircraft grade aluminum. If you want to check on shipping costs, go to www.ups.com and estimate from postal code L9T3H6. Mike. Link to comment Share on other sites More sharing options...
nissandoms47 Posted March 7, 2009 Share Posted March 7, 2009 ive had a set of 1" strut spacers sitting around forever.. no one seems to want them....hardware is less then 10 bucks..... Link to comment Share on other sites More sharing options...
morpheus Posted March 7, 2009 Author Share Posted March 7, 2009 Wow, when I started this thread, I thought I was doing people a favour, stut spacers seem to be hard to come by, unless you want to make them yourself, and since I was getting a set for myself I thought I'd share. Never thought I'd get ragged on like this over it.. Never mind then... Link to comment Share on other sites More sharing options...
new4x4r Posted March 7, 2009 Share Posted March 7, 2009 I WANT THEM!!! If theres something you can do about the price that would be awesome! Link to comment Share on other sites More sharing options...
Hunter Posted March 12, 2009 Share Posted March 12, 2009 I would also be interested too! Link to comment Share on other sites More sharing options...
morpheus Posted March 12, 2009 Author Share Posted March 12, 2009 I should have my set in my hands within the week, I'll see what I can do about volume discounts. Mike. Link to comment Share on other sites More sharing options...
ben0326 Posted March 12, 2009 Share Posted March 12, 2009 Would these level the front with the back on stock suspension? Or would it make the front higher than the back? Link to comment Share on other sites More sharing options...
new4x4r Posted March 12, 2009 Share Posted March 12, 2009 1" will level out mine nicely.. I just installed the AC lift and I'm 1" lower in the front from the top of the tire to the fender lip. Link to comment Share on other sites More sharing options...
shift220 Posted March 12, 2009 Share Posted March 12, 2009 Does anyone have a picture of what these spacers look like? Link to comment Share on other sites More sharing options...
alexrex20 Posted March 12, 2009 Share Posted March 12, 2009 the front wheel wells are larger than the rear, so tire-to-fender measurements don't accurately portray levelness. Link to comment Share on other sites More sharing options...
morpheus Posted March 13, 2009 Author Share Posted March 13, 2009 I'll post pics when I get them. Link to comment Share on other sites More sharing options...
Daddy Rim Posted March 13, 2009 Share Posted March 13, 2009 Does anyone have a picture of what these spacers look like? Link to comment Share on other sites More sharing options...
tekazgtr1984 Posted March 13, 2009 Share Posted March 13, 2009 Those are sweet. You still planning on making the other R50 mods posted on nx4.com? Link to comment Share on other sites More sharing options...
shift220 Posted March 13, 2009 Share Posted March 13, 2009 (edited) How big are those roughly? I have to disagree on the price also. Considering that 1" aluminum carb spacers are about $20 bucks (with hardware and a couple gaskets) and seem to be around the same size. Mass production aside, that's 10x the price. Not saying that Mike here is trying to rip people off, I just don't think you get what you pay for. I guess thats what you get with supply and demand and the fact that these are probably being made in Canada Edited March 13, 2009 by shift220 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now