Nismojunky Posted June 16, 2008 Share Posted June 16, 2008 okay i just noticed that this is broken and i ahve no idea what it is or how much its going to cost to fix it Link to comment Share on other sites More sharing options...
88pathoffroad Posted June 16, 2008 Share Posted June 16, 2008 Swaybar end link. Needs to be re-welded to the frame. Link to comment Share on other sites More sharing options...
Nismojunky Posted June 16, 2008 Author Share Posted June 16, 2008 Swaybar end link. Needs to be re-welded to the frame. where can i get that fixed i have no idea what im doing Link to comment Share on other sites More sharing options...
eglaisi_91pathy Posted June 16, 2008 Share Posted June 16, 2008 Try a good local bodyshop. When you weld on frames, don't take the cheapest route, pay a little more if you know it'll get done right. Link to comment Share on other sites More sharing options...
kiwipete Posted June 16, 2008 Share Posted June 16, 2008 Just remove the whole sway bar and be rid of it. You will get a whole lot more articulation without it, but then you have to be a bit more careful when driving on the high ways and cornering. I have removed both of mine permanently. Link to comment Share on other sites More sharing options...
Coucoui6 Posted June 16, 2008 Share Posted June 16, 2008 (edited) glad to be in socal where there's not salt and snow on the ground!!! but i know the beach can also rust out a car but not that bad. with that said ... i do have some rust, because my pathy was from ohio. Edited June 16, 2008 by Coucoui6 Link to comment Share on other sites More sharing options...
MikeV Posted June 16, 2008 Share Posted June 16, 2008 Oof, check the frame behind the rear wheels, may be ugly... removing the sway bar is cheapest route, just don't take any fast turns and you'll be golden Link to comment Share on other sites More sharing options...
88pathoffroad Posted June 16, 2008 Share Posted June 16, 2008 Personally, I'd go to a car wash, get a bottle of Purple Power degreaser and pressure wash everything underneath and in that area to clean it up and make it easier to work on. Link to comment Share on other sites More sharing options...
adamzan Posted June 16, 2008 Share Posted June 16, 2008 Same thing just happened to me, except mine was also disconnected from the swaybar too, so now it's just hanging by the ebrake cable, you can see it without even looking under neath. I'm taking it to get re welded. I was told by a mechanic (he checked the frame) it's safe to drive for now though. Link to comment Share on other sites More sharing options...
Nismojunky Posted June 16, 2008 Author Share Posted June 16, 2008 im going to take it to the autobody shop and get it done thx for the replys Link to comment Share on other sites More sharing options...
91PathSE Posted June 19, 2008 Share Posted June 19, 2008 Actually mine broke about 2 months ago..I hit a rock and ripped the mount off the frame....I just rid off the entire bar and it rides fine and a lil better articulation. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now