tmorgan4 Posted February 3, 2007 Author Share Posted February 3, 2007 Derrick...should have traded you complete strut units. I wish I had stiffer springs now with all the extra weight up front. Link to comment Share on other sites More sharing options...
MichiganAve Posted February 3, 2007 Share Posted February 3, 2007 Yeah, my new bumper is here now! I'm sure it weighs more than your ARB but at least I'm not putting on a winch for now. The weight with pallet was 214lb. I am hoping this weight leads to a little less topping out. Gotta get my alignment and brake lines done in the morning, but I'm hoping to get the bumper on tomorrow evening and see. Link to comment Share on other sites More sharing options...
nissandoms47 Posted February 3, 2007 Share Posted February 3, 2007 id like to see what that kma bumper looks like on the qx4 Link to comment Share on other sites More sharing options...
MichiganAve Posted February 3, 2007 Share Posted February 3, 2007 So would I, lol. Probably get it on tonight and get some pictures in light tomorrow. Alignment and brakes done now. I'll take some pictures to show the brake lines in. I got the ABS line brackets adjusted down a little as well. Got the camber to 0 with the camber bolts. Link to comment Share on other sites More sharing options...
NismoSkyZ Posted February 4, 2007 Share Posted February 4, 2007 Shouldn't you be chekcking out prado interest? Link to comment Share on other sites More sharing options...
bradb Posted February 7, 2007 Share Posted February 7, 2007 Add one more for spacers,when my new TJM bumper and winch get here I'll need that extra inch to re level things out. Link to comment Share on other sites More sharing options...
tmorgan4 Posted February 7, 2007 Author Share Posted February 7, 2007 I guess I should get a few of these made. There hasn't been too much interest but I'm sure a few guys will want them as soon as they're out. Link to comment Share on other sites More sharing options...
FUELER Posted February 7, 2007 Share Posted February 7, 2007 WIth the right type of internet marketing (these message boards) you should easily be able to pump 10 or 20 pairs out over a few months time... Link to comment Share on other sites More sharing options...
RWC5S2 Posted February 7, 2007 Share Posted February 7, 2007 I am very interested in your 1" spacers. Hopefully you can get some made up? I shall be watching for any info. Link to comment Share on other sites More sharing options...
OBXbeachpathy Posted February 7, 2007 Share Posted February 7, 2007 Tyler I'm about 90% sure I'll want a set bro Link to comment Share on other sites More sharing options...
nissandoms47 Posted February 7, 2007 Share Posted February 7, 2007 uh dont you already have a set? lol Link to comment Share on other sites More sharing options...
OBXbeachpathy Posted February 7, 2007 Share Posted February 7, 2007 for a friend Link to comment Share on other sites More sharing options...
nissandoms47 Posted February 7, 2007 Share Posted February 7, 2007 ah lol nice. Link to comment Share on other sites More sharing options...
OBXbeachpathy Posted February 8, 2007 Share Posted February 8, 2007 Tyler is that a flat rate no matter how many are made, or will the price go down if order number goes up. Either way I'll want a set. Link to comment Share on other sites More sharing options...
RWC5S2 Posted February 9, 2007 Share Posted February 9, 2007 Please count me in for a set of the 1" spacers. I can have a check in the mail when ever you can order. Link to comment Share on other sites More sharing options...
tmorgan4 Posted February 9, 2007 Author Share Posted February 9, 2007 (edited) Hey guys...I apolgize for the delay. I think I'll go ahead and get 4 sets made...1 for RWC5S2, 1 for Brandon, 1 for Bradb and 1 for an extra. I better read through the above posts and make sure I'm not leaving anyone else out. Hopefully the price won't go up at all since it's a relatively small order. Edited February 9, 2007 by tmorgan4 Link to comment Share on other sites More sharing options...
RWC5S2 Posted February 10, 2007 Share Posted February 10, 2007 Cool. Let me know when and where to send some money. Link to comment Share on other sites More sharing options...
bradb Posted February 12, 2007 Share Posted February 12, 2007 Still in,just let us know your time table.No hurry,new bumper still a flat piece of Australian steel. Link to comment Share on other sites More sharing options...
MichiganAve Posted February 12, 2007 Share Posted February 12, 2007 I'm looking for a small spacer, any of you guys getting rid of one of those Rocky Road ones that are 9/16" (but I heard closer to 1/4")? Link to comment Share on other sites More sharing options...
nissandoms47 Posted February 12, 2007 Share Posted February 12, 2007 why do you need another spacer? Link to comment Share on other sites More sharing options...
MichiganAve Posted February 12, 2007 Share Posted February 12, 2007 I've got more rake than I wanted now. The front sagged with my new front bumper more than the rear sagged with my new rear bumper. So my rear fenders are 1.5" higher off the ground than the fronts. It might get a little better after I put on the tire swing and change the spare from a 30" to a 33", but even throwing an additional 100lbs in the trunk doesn't make it sit level. Link to comment Share on other sites More sharing options...
97vapathy Posted February 12, 2007 Share Posted February 12, 2007 i need to get a set Link to comment Share on other sites More sharing options...
nissandoms47 Posted February 12, 2007 Share Posted February 12, 2007 do you have any pics? i wanna see what one looks like.. Link to comment Share on other sites More sharing options...
kevs03pathy Posted February 13, 2007 Share Posted February 13, 2007 If you can get one more set made I would like a set. MichiganAve if I can get a set of these I will have an extra set of the Rocky Roads to sell. Link to comment Share on other sites More sharing options...
MichiganAve Posted February 13, 2007 Share Posted February 13, 2007 Kev, are they really the advertised 9/16" or much shorter? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now