linkinpark

I have a set. They look great and function even better. I also have 4 LED fog lights. Two in the front and two for reverse lights. Then I just ordered 4 7inch HID fog lights. So I will light up the night now.

That switch turns on if the pressure is 10 psi or lower. So if it is above that then it wont even turn on.

Yes I went with the best pump I could find. Has the highest cfm and quality. I didn't want to wait for an hour while filling up tires. I was able to fill up my 35s and four sets of 33s in less than 30 min. Plus the arb pumps are 100% duty cycle. Made for running constantly. One thing I will add tho. Get a new alternator. I swapped in a quest one and it makes a difference.

I just installed the high flow arb pump on my pathy. Can fill my 35s from 6 to 30 in about 90 seconds each.

Just so you know they won't rub on a bump. No matter how much you flex that part does not move. I had a set of 35s that you could only fit a quarter in and they never once rubbed. But if you feel you totally need more space then go with a better rim.

I'll throw in my 2 cents. I have had a stock clutch. A cheap "racing" clutch from eBay. And currently have a center force stage 2 for my r50. And I'll tell you this. I'll never buy anything but a center force. It's the best feeling clutch I have ever had. It's been almost three years and I have 35s on stock gears and wheel heavily. Still grips hard to pull my boat and the pedal feel is light. Absolutely no chatter it anything.

We're your ac lines in the way at all?

Its not. They require a lot of voltage to run them and a single ballast just doesn't have the amperage to run both. Are they ebay HID??

The strait bar missing link helps a lot. But I plan on making an x type brace to add to it.

So after having my SFD lift on for about 8 months I decided to make a missing link to stiffen up the sub frame. Since no one makes them I had to. I don't have pictures yet but will soon. One question I have. Has anyone had shaking from the front after having the lift? Also if anyone is interested in a link I would be happy to make and sell them.

Yeah no cat would be great. Mine are already removed.

Yes both. I put a post of my build on here somewhere.

Yeah I have the same tires. Mine are 35x12.5/17. About a quarter inch of room left. Looks good.

I'm very interested. Would they be bypassing the cat?

I'm very interested. Would they be bypassing the cat?

I'm the one that started this. Yes they work.

Ok so who will ship me some? Ill PayPal you the shipping.

You won't ship anything?

Something like that. But one problem with that is strength and cv angles. Have a plan for both.

I would like about three to four inches. I am making a strut extension. But making another mod for keeping the cv at a good angle. So I will have more drop but the same tuck.

If anyone has an old set of struts they are thinking of throwing away would you mind cutting a few inches off of the top of the rod and mailing them to me?

How much is this project costing ya? Hope that's not to nosey.

Looks good. Why the dana 44? What was your reasoning? JW

Can someone tell me where this sensor is? Is it on the Evap canister itself? My book doesnt tell me. Also there are two on the canister so pointing out which one would be great. Thank in advance.

Deal. One of my new thoughts have been longer control arms on the back.