93_ditchfindah

im putting in a flip touch screen 7 inchdeck with full bose sound system out of my junk 99 maxima se. then ill have my 1000 watt mtx jackhammer amp running 2 12 inch mtx with jack hammers. im all over this truck with wiringtrying to keep the stock speedo outta the 93 im going crazy with this rig. STRESSED IS NOT THE WORD.

atleast i got my dash ready... running my lines for subs and putting in done light for driver/passenger. and for slartibartfast heres what the real joke is... but on a good note i ripped out all my seats, and started replaceing with my other pathys seats. i think it looks awesome gray on blue.. so easy my girl could do it!and yes shes a keeper.... the truck i mean.

heres my radio harness.... noooot! :I

the fsm? and where are the clifford diagrams?!? ive been searching all night just for the damn radio wiring. i looked into that clifford alarm company and a few shops around me actually install it. and i mean.... a guy who can hook it up,should be able to rip it out

how can i override this damn thing without making the truck never wanna start again haha?!? look at this jerry-rigged wiring!!

i kid you not a ford ranger radio haha im gunna have to upload pictures in a lil bit here but its a complete mess for wiring. they put in an aftermarket alarm then they cut the alarm out.... its weird.....

Hey everybody im swapping out my 93 pathfinder xe square dash with my 94 nissan pathfinders rounded dash. its just about a complete bolt back in but ive read the 94 is an electronic speedo and my 93 is a cable speedo? and was wondering to know if there was any easy way of getting around this? i also need the radio wire diagram for my 93 pathy. the clown who had it before me cut the harness off and put a stock ford ranger radio in...

unccpathfinder message me for details about your dash swap!! im swapping the same rounded dash from my 94 xe into me 93 xe (flat dash). did you have to modify the dash mounts themselves? and how did you get the speedo to work?

i just ripped my 93 pathys dash out today. im putting the round dash in from my other94 pathy.... the wiring doesn't seem to bad. any ideas on the speed,. tach, and mileage cluster? i dont think the speedometer is gunna work...

awesome thanks for the tip and sorry if i sounded like a jack@ss haha. and precise i guess im going to just have to try it haha. the lift is supposed to come in tomorrow too!! i hope with my 3 inch lift ill be able to fit the tires on my mickey thompson ultra rims haha. only time will tell!

silverton im not going for wider tires but taller tires hahaha

nissanland you recently just took off your upper control arms right? and was it the control giving you trouble in not wanting to come out? thank god my girlfriends father owns a part store!

wheres rausch creek? haha and im getting my uca's in on wednesday and lifting my rig this weekend hopefully. i think im gunna have to trim for the 34s which sucks because my truck has 0 rust:/ but gotta do what you gotta do right? and not bad for 700 bucks bud! i got my rig for 400 lol

anybody have any info on re-indexing the t bars my lift comes in on wednesday! automotive customizers

how would you go about doing this without a stock roof rack:/ i think they look badass especially yours trenton163. and where did you drill the hole in the roof?

any leaks with the rood rack yet? thinking about doing this to mine

called advanced and they have a gl-4 gear oil that is 85w90?is this a safer solution than the gl-5 that is probably in my tranny? ive called a few places and noboddy has the redline stuff you guys are raving about haha

Hey guys few questions... Im doing the JGC suspension lift. i bought the uca's off 4x4parts.com and the panhard drop down bracket. Was wondering if anyone knew the EXACT shocks i can use to accomidate my 3 inch suspension lift.. Theres a ton of threads on it but people just argue aboput which ones to use. Next question is with the tires. i bought some 34x9.5r15 super swampers (I couldnt pass up on the deal) whats it guna take to make them fit? Any help would be AWESOME Thanks~Jon

where you going in northeast to trail put? im in nh and hopefully putting my lift in this weekend! just picked up interco tsl 34x9.5r15s. gottta make em fit haha

how much were the new uca's from 4x4parts.com? dont wanna pay more then about 200:/ im in us so shudnt be too much to ship and the reason you only got about 2" of lift hagge is you probably didnt reindex your torsion bars. takes about 30 min. each side.

What truck axle are you running? did you have to rebuild the rear-end to match the front axles gear ratio?