93_ditchfindah

I know me and David are in new England (NH and he's in northern mass) join the Facebook npora and we'll see if I have my rig running by then Sent from my SCH-I435 using Tapatalk

well ive been using the push to start for about 8-9 months. not a single problem so far AND.... No one can steal it lol. they cant figure out how to start it. =)

Well found a 5 speed center shift bezel. Came out AWESOME! Any idea where I can get the auxiliary switches that fit in the console?

How much did it cost to from tactical armor group ive been looking at thier bumpers

After many months of reading I found 3 peole off o infamousnissan.com . THIS ONLY PERTAINS TO THE 93 SQUARE DASH. While asking question I had learnt that the swap was the easiest from a 93 to a round dash. Pre 93 you have to worry about pin locations AND wiring colors. With a 93 it is PLUG AND PLAY!!Strip all the wires from the new cluster(94+) and all the existing wires from your old square cluster. Match the colors up... and BANG. every gauge works EXCEPT the speedometer. Going from a 93 with a speedo cable, the 94 cluster is an electric driven speedometer. You need to buy a vehicle speed sensor out of a pathfinder. 94 or 95.(ex. You have a 93 5 speed, buy a speed sensor for a 95 5 speed) if you need any help with this swap feel free to post on here or private message me. IT DOES NOT TAKE A BRAIN SURGEON.If you jave time and patience you can do this mod and it makes your interior look 100% better

What do you mean dont hit the obstacles?!?!!! "Tack er' up and dump ah' " nissan when u come up to nh well go deep wheelin.

What in the hell do you mean jeeps pull you out!

Any new updates on your pathfinder Mr. Jim? I'm really sorry to hear people in your area are just as scummy as most of the people here in NH. I've been looking on ebay and craigslist for anything out of the ordinary in your area.

Did u ever get into the compartment?!

These dimension came out awesome!! I'm impressed haha youd put me to complete shame! but i believe if you press on there where it labels which plane is which... i believe you can put the measurement on the picture itself. And dont get frustrated!! Given the detail in those dimensions.... id say your pretty damn good at CAD haha.

hahahaha you seriously know how to describe women. and after looking quite a bit over my truck i noticed the o2 sensors wires had been ripped clean off while trying to recover my buddys chevys and jeeps this weekend thank god i actually took a trip down to harbor freight the night before and felt like a kid in a candy store!! bought a tractor jack (HI-Lift jack) for $50, Welder 180 mig/flux core for $285 and a brand new auto darkening helmet for $45... You wanna take about never turning your back on a woman... i slept in my truck this weekend haha. but heres a few pictures of my not so smart friends against a swamp on the powerlines Perry is in the 09 wrangler, tylers in the 02 chevy 1500 Josh is in the river with his 95 longbed single cab gay mans chariot 1500 i didnt even pull any of em out they all used my jack i just watched with a couple buds my truck got completely cover and all i had was 2wheel drive(blown cv shafts this fridays project)

up here in nh its salt stricken junk yards. there is no wd21s in the yard but a crap ton of xterras though! would be cool if i could just do a direct swap of the transmission

ill give it a try when i get home. its never done that to me and it kinda got me a bit nervous... what does TSP stand for? haha of course it happens the day after i order 2 brand new cv axles, buy a new welder for my new bumper, and an 80 gal air tank!! :I

another great monday!! ive got the 93 xe v6 3.0 with 270k miles on it. truck runs beautiful. till this morning. i always start my truck to let it warm up in the cold. i started it and the truck was idling real rough and sputtering. C.E.L. was on. so i went to rev her up and it stalled out on me with my foot feathering the accelerator. so i shut it off. started it again.... and it ran fine all the way to work!?! anyone have any clue was causes this? has new plugs and wires... and yes i checked all the plugs are tight.... again guys... thanks ahead of time!!

the closest harbor freight is over 3 hours away in salem new hampshire haha

using screwdrivers to remove the snapring takes talent? and i thought it was just because im broke hahaha

so i could swap an xterra 4wd 5 speed transmission into my 1993 4x4 5 speed nissan pathfinder

your best bet is to go with redline mt-90 MAKE SURE IT IS A GL-4 fluid tho. the gl-5 has addatives that eat away at the brass synchros in our transmissions. i believe they had a TSB for the tranny fluid level to be at 5.3? anybody else know exact level? and i dont know how much transfer case contains

i have them on my lifted pathy and she rides like a dream! But PLEASE make sure you put locktite on your upper control arm bolts. one of mine came loose and stripped out all the threads on my frame. i had to tap and die the frame for a larger bolt.

hey boss im gunna try and make it even easier for ya.... just go to your local parts store and order some rancho rs5112's. i really dont remember what they were supposed to fit... but i can vouch they are more than long enough and a hell of a lot cheaper than 4x4parts.com.

bro.... your rig is amazing haha

i really wanna see your seat storage compartment that you came up with!!