Slashjt

Yes, I'm aware of that.. and doing donuts with LSD is waaaaaaay easier that with an open diff (the inner wheel keeps spinning and nothing happens). I have tested the LSD off road and works very good, but it ain't as good as a full locker, that's clear.

I tested the LSD... http://www.youtube.com/watch?v=rrsd3eRs2Wg

$1000 for changing it ?? damn... In Chile, $140 bucks for labor and $270 bucks for the ceramic clutch kit!

Mine had a Pre-cat, I took that one out, along with the cat. Replaced that with only 1 Magnaflow Cat, ever test went O.K. Felt more powerful and live.

I made it at home, very easy. I used a special "plastic" called Technil

I stood near pathy, look at it and enjoyed it

I went off roading and enjoyed!

omg that's very good news!! thanks, I'll get right to it

I didn't find anything with search. Is it possible to take this out without removing the dashboard? I need to change the AC/Heater lights. If so, how could I do it? I have a roll cage and taking removing the complete dash is a pain in the A

Body and Paint started to fix the crash... $300 dolars.

I rescued it from my work... I bought a car! and left pathy alone. Now's at home and sunday is going to the shop. Body and paint + some nice upgrades

So?????

I just put some Rost-off and then some spray grease on them and they quiet down for a while..

OEM Idler arm, cooper bushing, Arm Brace (I made mine for like.. 2 bucks) That will last Forever

I probably going to fab a complete ultra-beefy bumper, using the actual center of mine.

The Ceramic Clutch and a hill lead me into making a mistake.. and I hit another car that was turning into the street. Insurance will take care of his car. Pathy has little but pain in the ass damage. The corner of bumper went a little bit in, with the side panel. The corner light broke too. When I turn to the right the wheel rubs in the corner, but just now I use the jack and some wood to fix the damage. Now it doesn't rub. ME The Victim of my Foolness..

Any news?

I crashed mine =/

p0rn

Sorry to highjack the thread, but anyone knows where I can get VG33 cylinder heads (that's what I need to do make my VG30 to VG33 right?) and probably will be able to ship them to Chile? I didn't find any at ebay..

how much boost can the engine take (safe)??

great

front and rear sway/stabilizer bar bushings and rods?

almost 2mpg better in my case

Mega Squirt will make a HUGE diference...