Jump to content
  • Sign In Changes:  You now need to sign in using the email address associated with your account, combined with your current password.  Using your display name and password is no longer supported.

 

  • If you are currently trying to register, are not receiving the validation email, and are using an Outlook, Hotmail or Yahoo domain email address, please change your email address to something other than those (or temporary email providers). These domains are known to have problems delivering emails from the community.

ANDY

Members
 View Profile  See their activity

  • Posts

    519

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by ANDY

  1. ANDY

    stereo install

    ANDY posted a topic in The Garage

    has anyone used a harness like this when installing a after market deck? cause im having some problems i cant hear anything til its full blast and my fronts barely have sound coming out, but the rears sound good but only when its maxxed out. i was trying to do this without messing with the stock amp. any help would be great ive already read an old thread but barely understand it
  2. ANDY
    looking good man, cant wait for a photo shoot when ur all done
  3. ANDY
    looks good.how did you bolt it to the vehicle?
  4. ANDY
    i reindexed my tbars today but not sure how much lift i gained but it was a good amount maybe 3ish, i always forget to measure things before i start but it looks way better before after hope pic isnt to big
  5. ANDY
    looking good stalker. what kinda of chamber(flowmaster) did you get?
  6. ANDY
    yeah i know fram filters suck but its what i had and didnt want to go to town. so what aftermarket filter is good, are champ lab filters? but i kinda figured vgs clatter cause my 2 door does it some times
  7. ANDY
    not sure why im getting dry starts but in the am and after work or whenever it sits for a little while my lifters or valves tick/clack for like 5 seconds. and im running a fram the orange one, when i bought the pathy it came with 2 spares and some extra oil . but i hope it clings to the top end so i can see if it will work
  8. ANDY
    changed my oil and added lucas.hopefully no more dry start ill see how that works out
  9. ANDY
    so what switches are supposed to be lit up when the lights are on?
  10. ANDY
    well for 15 more bucks you could get everything checked and topped off if needed. and last one to touch it owns it so there is your insurance.
  11. ANDY
    installed some silverstars after work now i need to adjust my lights cause i messed with them with the old bulbs
  12. ANDY
    . Struggling to decide whether or not to mount a cupholder to the passenger side dash. i seen in this heep at work some pvc pipe with a end cap screwed into the floor board with a sheet metal screw came out pretty good i thought of doing the same thing sorry i cant gind any pics but hope you get the idea
  13. ANDY
    installed LED licnse plate lights. all i gotta say is wow!
  14. ANDY

    freaking key way stripped out on my crank, dammit!

    1. BowTied

      BowTied

      Ouch! To repair that is likely not worth it? Just get another crank?

    2. ANDY

      ANDY

      yeah gonna try another dampner and jbweld if all else fails strip and and sell it back to the state

    3. nunya

      nunya

      you can get a new keyway ground in. call some local shops

       

  15. ANDY

    headlight bulb is pissing me off keeps popping out of place i think the retaining ring is jacked up

  16. ANDY
    i think knock sensor
  17. ANDY
    fixed my washer fluid pump.
  18. ANDY
    thanks B for the info got mine working took 5 minutes.
  19. ANDY
    i fixed my speedo needle it was curled down, i heated up and it went straight so now it works yippie.
  20. ANDY

    is the oil pressure light supposed to come on on accesory? cause mine dosent turn on at all

    1. Show previous comments  1 more
    2. ANDY

      ANDY

      i think so too because my 87 has all the dummy lights that turn on but my new to me 90 oil light dosent turn on and i did swap the bulbs with the hibeam bulb and the high beam worked?

    3. adamzan

      adamzan

      it should come on and then when you start the truck it will go out almost immediately. i would also check to make sure the sensor is plugged in

    4. ANDY

      ANDY

      yeah ill check that out tommorow at work . that way i know if it does work just in case. thanks guys

  21. ANDY
    My link i found a website where they used to calmini lift.but here it is
  22. ANDY
    P/O changed the timing belt and water pump 27k miles ago but 6 years ago, everything looked great but i still wanted the comfort of it not breaking since it was 6 years ago but it went pretty smooth but i did take my sweet time 9am-230pm. not sure if its related to the timing belt change but i does seem like it takes 2-3 seconds to turn over now. but anyways i changed the tb,wp,t-stat,upper and lower rad. hoses,
  23. ANDY

    Timing belt was done at 180k now is at 207k. was done 6 years ago should i change belt?

    1. Show previous comments  1 more
    2. Trogdor636

      Trogdor636

      Definitely

    3. ANDY

      ANDY

      Yeah thats what i thought someone told me it should be okay but ill do it this weekend or atleast try too

    4. Tungsten

      Tungsten

      It doesn't hurt if you have all the parts. I bet your old belt still looks like new.

  24. ANDY

    hey guys i got another pathy. 1990 xe 5spd 4x4 all stock.ill post pictures later

  25. ANDY

    Free 2D CAD

    ANDY replied to Precise1's topic in General Forums

    i want to download it cause i always wanted to mess around with this kind of software but i dont like DL stuff that cause i dont want no viruses. so if anyone else downloads this let me know if it works and the 411
×
×
  • Create New...