BLouisGod

thanks, i need to measure them, but i was wondering if anyone had any success with any other sizes besides the stockers.

sota is nice. ive got a couple friends who live there.

Thank the lord! I have some searching to do :type:

The basket on the 5x7s i got dont fit in the front door so there are going to the rear deck. what size would fit the fronts, other than the 5x7s? ive heard some nissan trucks are using 5.25s. thanks!

welcome aboard

you can do that. ill post some pics of the intake i made for 6 bucks this weekend... not to highjack

nice mod, mainly cause its cheap.

there is no vibration coming from the distributor. im going to change the timing belt and open the front of the engine to see whats going on. sounds like a loose roller or worn drive belts, i dunno. ill find it hopefully.

be like a ricer and mount it on your drivers side A pillar :Magic:

dunno, just got the truck last week. its need to go in to have it checked, also it needs new drive belts... the sound just started today after about 20 miles of driving; truck has 130000m on it.

thanks slick, ill look into it. it sounds more like a gear or something, its rhythmic and as pretty fast. kind of sounds like it is coming from the front top left of the engine.

Theres a wooshing sound coming from the top / front of the engine. It has a rhythm, but I can kind of pinpoint it coming from the distributor or the cap, however there is no vibration at all. Has anyone heard anything similiar to this on their wd21s? Im hoping it is the distributor cap...! thanks for any insight. :idea:

off topic, i need airbags. sounds like a @!*% relay in the box.

my factory switch is in the center console above the ebrake, next to the heated seats thing and the shock selector.

i dont think its bad. i just painted the worn off factory chrome grill to black and it looks hell of a lot better. fog lights and clear bumper lamps make a big difference too, IMO.

i guess it depends on how much the sensors are for it.

yeah it sounds like the cross member bolts and the steering linkage, but ive gone through and torqued down the bolts. ill look at the turn stops. thanks.

Ive got an SE with the Heated Seats, the ride control, all that @!*% and most of doesnt work. So XE or SE, it doesnt matter

Just put on a left new tie rod end and new half shafts and for some reason, turning left and sometimes right creates a SNAPPING noise from the front end. Could this be torsion bar wear? Ive inspected all bushing and nothing looks broken or lose. Any insight is welcomed! thanks

Bueller.....?

nice work!

thanks for the pic Slick. I like both looks, so I guess Ill just leave it for now.

good deal for 500 !

nice path, whats your plans for it?

thanks again 88