KILLVOX

The more i think about it, I think im just gonna put exhaust manifolds back on instead of headers. I know they are cheaper and probably easier to put in.

First Gens. RULE! And four is better than two. -bounce-

There is a thread about this with pics. I think it was Grim Greg that posted it :shrug:I believe the use fiber glass and mesh to fix it. I need to fix mine also. I have a hole in the same spot.

I really wanted to doit for the look and i didnt think about the water getting through. So i guess i wont be cutting a hole in the hood. The scoop does come with the double sided tape, but im going to screw it or pop rivit it down and then Bondo, prime and paint it. The whole deal. Thanks for the info. :cool2: I found a nice hood from an 87. Will that fit my 95?

So im gonna pick up the nicest hood that i can find at the junkyard,and im gonna put a hood scoop on it. What i need to know is will all the years from 87-95 fit my 95? And is there any advantages to cutting a hole in the hood so air actually flows through the scoop. Thanks.

I have printed them out, I keep them in my glove box and have hit five pathys so far

Im in that club too!

Found a little orange sticker yesterday on the rear pumpkin as i was scraping off the dirt and grime. I remember seeing some discusion about it but didnt really pay attention. is this a good thing. Can someone give me some info or a thread on this subject. Thanks

Huh huh, he said asshat.

Is this a good one

Doritos!!!!! sly

A pa is high on my list of mods. Even higher now Does any one have pics or info on putting one in -bounce- Thanks

Thanks Earth. Thats the thread i was looking for. Good luck to you too. I'll try to take pics of the swap.

My buddy has an 89 taurus that he is junking. I was thinkink about taking the electric fan out and swapping it out. will that year fit in the pathy. I hope, I hope -bounce-

Sorry. My thoughts and prayers go out to you.

Or try some Kangaroo snot.

These are my next rims. aaaaahhhh.... some day, some day. -bounce-

Hey Filthy, What kind of tires are they? :cool2:

V6, could i replace my column with one from a hard body or would i be wasting my time because it ist that big of a deal? Thanks

Yeh, What is that? It looks really cool. Tires look great too. :cool2:

Hey V6, What do you mean by that? The reason i was wondering. Ever since i put in my A/C 3in. body, my steering felt like it had a little to muh play in it. There was nothing in the lift kit for the steering. the directions just said if i can remember something about undo the spline bolt then tighten it back up after the lift is in. Can you enlighten me on this :cool2:

How is anybody able to do a license plate check if you blank it out Nice sticker job

Does anyone know where i can get some? Thanks -bounce-

Hey Marinetime! Thats all i did, was put my name on it. Now lets get out there and spread the word!!! Its time for a Nissan Pathfinder New World Order!!!! :bow: :gossip: :gossip: :gossip:

He Rami, looks great! Did you put JGC coils in the back and did you have to install taller shocks when you put in the coils and crancked the t-bars? Thanks