Leaderboard

Not sure what you are missing but these might help. Should be 3 bolts on a bracket connected to the lower manifold back side and 4 bolts mating it to the head assembly. Forget the red arrows in the lower pic. I used this image for referencing the coolant crossover pipe

IT RUNS ON all 6!!!! I installed the new injectors and it runs like it is supposed to....except for an exhaust leak on the "secondary cat" on the passenger side. I say that in quotes because they are not cats, but just baffles on my pathfinder. When I get back from a fun weekend on the lake it will be rear suspension and brakes time. My only hold up is the front wheel spacers which shipped yesterday.

I never closed the loop on this one. It was the radiator. I used some dye in the coolant system to identify the leak. I had crack all over the top of the radiator. Very small, but added up.

You got this in the bag man, I hope it all works out.

I figured I should leave a trail to my current vehicle for anybody who's interested, here's the link to the build thread for my 4Runner: http://www.toyota-4runner.org/4th-gen-t4rs/258887-mjotrainbrains-build-thread.html It needs to be caught up as I've done the timing belt and some other stuff since the last update, and once I get a little rust sorted out it'll be time for the actually interesting stuff. If you want more of a day-to-day update you can of course check out my Instagram @mjotrainbrain and if you prefer a video format you can check out my YouTube channel mjotrainbrain616, but no promises of regular posting there.