spicyheckboi Posted June 29, 2019 Author Share Posted June 29, 2019 thanks for all that! got the 9448s and 29” bilsteins and i love the way it drives now also that looks way better too Sent from my iPhone using Tapatalk 6 Link to comment Share on other sites More sharing options...
Bax03SE Posted June 30, 2019 Share Posted June 30, 2019 I like that you painted the rear springs to match the purple up front! 1 Link to comment Share on other sites More sharing options...
spicyheckboi Posted June 30, 2019 Author Share Posted June 30, 2019 I like that you painted the rear springs to match the purple up front!thank you! i honestly wasn’t expecting to find the same purple as our front springs but rustoleum has it at my walmart ! i got lucky lol. i need to bang around with a hammer some more and really under coat the truck as the next project. i LOVE this spring shock set up especially paired with the front. this damn thing handles like no bodies business (i do also have the missing link in the front as well) and i have all my tools in the back of the truck in that picture already. i normally would see two inches of sag from all the weight. thanks again for your help on the front set up, you doing that and making that an option really improved these rigs. i still somehow haven’t managed to get topout up front and paid less than half of ac spring set up for it. also i did keep the full coils in my 9448 just because why not i like the way it looks a whole lot Sent from my iPhone using Tapatalk 1 Link to comment Share on other sites More sharing options...
PathyDude17 Posted June 30, 2019 Share Posted June 30, 2019 She looks good! Really beefy. The bumper deletes and black trim is pretty awesome 1 Link to comment Share on other sites More sharing options...
spicyheckboi Posted July 1, 2019 Author Share Posted July 1, 2019 She looks good! Really beefy. The bumper deletes and black trim is pretty awesomethank you very much!!Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
spicyheckboi Posted July 4, 2019 Author Share Posted July 4, 2019 I like that you painted the rear springs to match the purple up front! when i saw the color at walmart i had to get it for the rear, i wasn’t expecting it to be that close though! came out nice! EDIT this was a draft i just accidentally posted and can’t figure out how to delete. thanks tapatalk lol Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
spicyheckboi Posted July 5, 2019 Author Share Posted July 5, 2019 tomorrow morning we leave for the pinky of Michigan from North Jersey for a week long trip. all our stuff in there for four people and two dogsgod my phone takes such sh***y pictures i also decided to wrap my steering wheel in paracord and didn’t have enough so i’m multicolored and i finally finished the light switch mount ! Sent from my iPhone using Tapatalk 2 Link to comment Share on other sites More sharing options...
mjotrainbrain Posted July 5, 2019 Share Posted July 5, 2019 Sounds like a good trip, if you go past Grand Rapids MI wave hi! 1 Link to comment Share on other sites More sharing options...
spicyheckboi Posted July 6, 2019 Author Share Posted July 6, 2019 Sounds like a good trip, if you go past Grand Rapids MI wave hi!i will!! Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
spicyheckboi Posted July 9, 2019 Author Share Posted July 9, 2019 i waved as we went past the signs for towards grand rapids! Sent from my iPhone using Tapatalk 1 1 Link to comment Share on other sites More sharing options...
boltregalia Posted July 11, 2019 Share Posted July 11, 2019 Looking so great. 1 Link to comment Share on other sites More sharing options...
spicyheckboi Posted August 19, 2019 Author Share Posted August 19, 2019 went out to play in the woods a little last eveningSent from my iPhone using Tapatalk 3 Link to comment Share on other sites More sharing options...
spicyheckboi Posted September 4, 2019 Author Share Posted September 4, 2019 i never posted these! on the way out i ended up cutting my treds on the body panel a tiny bit but it’s not bad isn’t howling and now i know i need to beat up some metal. this was on the tucked side in the previous pics Sent from my iPhone using Tapatalk 2 Link to comment Share on other sites More sharing options...
spicyheckboi Posted October 5, 2019 Author Share Posted October 5, 2019 I bought a smittybuilt tj bumper and some metal for brackets! Also for radiator support repair of course. So that means I'll also be relocating all the plastic bits including the wager fluid and coolant resivoirs and a air intake will potentially get sealed up. Anyone have any suggestions on relocations and mounting? It will later get a winch plate put on it. Smittybuilts winch plates and even winches are cheaper than harbour frieght on Amazon. This has been an Amazon build huh? A Little bit of speedway motors . com but mainly amazon has been my supplier lol new phone now finally that's why I've been dark for so long. Gotta redownload tappatallk 1 Link to comment Share on other sites More sharing options...
spicyheckboi Posted October 6, 2019 Author Share Posted October 6, 2019 Heres the bumper!Sent from my LM-G710VM using Tapatalk 3 Link to comment Share on other sites More sharing options...
Sjackson2 Posted October 8, 2019 Share Posted October 8, 2019 On 10/5/2019 at 2:10 PM, spicyheckboi said: I bought a smittybuilt tj bumper and some metal for brackets! Also for radiator support repair of course. So that means I'll also be relocating all the plastic bits including the wager fluid and coolant resivoirs and a air intake will potentially get sealed up. Anyone have any suggestions on relocations and mounting? It will later get a winch plate put on it. Smittybuilts winch plates and even winches are cheaper than harbour frieght on Amazon. This has been an Amazon build huh? A Little bit of speedway motors . com but mainly amazon has been my supplier lol new phone now finally that's why I've been dark for so long. Gotta redownload tappatallk Somebody on this forum made custom overflow and wiper reservoirs from 3 inch pvc pipe. I’ll try to find it 2 Link to comment Share on other sites More sharing options...
spicyheckboi Posted October 8, 2019 Author Share Posted October 8, 2019 Somebody on this forum made custom overflow and wiper reservoirs from 3 inch pvc pipe. I’ll try to find it Thank you! I rememebered something along those lines in my travels on our site but when ive trued to find the damn thread i just havent yet. I cant even rememeber who did it!Sent from my LM-G710VM using Tapatalk Link to comment Share on other sites More sharing options...
Sjackson2 Posted October 8, 2019 Share Posted October 8, 2019 5 hours ago, spicyheckboi said: Thank you! I rememebered something along those lines in my travels on our site but when ive trued to find the damn thread i just havent yet. I cant even rememeber who did it! Sent from my LM-G710VM using Tapatalk Found it 1 Link to comment Share on other sites More sharing options...
spicyheckboi Posted October 8, 2019 Author Share Posted October 8, 2019 Found it Heck yeah! Shouldve known it was bax lol. Sent from my LM-G710VM using Tapatalk 1 Link to comment Share on other sites More sharing options...
spicyheckboi Posted October 13, 2019 Author Share Posted October 13, 2019 This is hilarioushttps://cloud.tapatalk.com/s/5da2754bc6844/Sr1HBDV.mp4Sent from my LM-G710VM using Tapatalk Link to comment Share on other sites More sharing options...
spicyheckboi Posted October 22, 2019 Author Share Posted October 22, 2019 Its on there and my cheap harbor freight lights do not fit anywhere now lol. Sent from my LM-G710VM using Tapatalk 2 Link to comment Share on other sites More sharing options...
RainGoat Posted October 24, 2019 Share Posted October 24, 2019 You can easily attach those lights to the tube. Tube gives you endless mounting possibilities. 2 Link to comment Share on other sites More sharing options...
spicyheckboi Posted October 24, 2019 Author Share Posted October 24, 2019 You can easily attach those lights to the tube. Tube gives you endless mounting possibilities.Yeah thats true but i do not want to drill into it or spend money on a two inch clamp for it, id rather get new lights for the front and wire these into a switch and into my reverse lights because ive been thinking my reverse is pretty dark at night. Plus would be nice to have highbeams for those tailgaters But mostly i just want new lights lol. Ill probably still end up having to get those clamps no matter whatSent from my LM-G710VM using Tapatalk 1 Link to comment Share on other sites More sharing options...
PathyDude17 Posted October 24, 2019 Share Posted October 24, 2019 The bumper looks awesome man! 1 Link to comment Share on other sites More sharing options...
spicyheckboi Posted October 24, 2019 Author Share Posted October 24, 2019 The bumper looks awesome man!Thank you!! It took a lot of measuring and remeasuring to get it to where its welded center on the brackets and not crooked. Ive yet to jack it up by it with the highlift but ive done some jumping on it and am happy with its strength for at very least a deer deflectorSent from my LM-G710VM using Tapatalk 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now