Guest youngpathy Posted May 15, 2006 Share Posted May 15, 2006 will 32 11.50 inch tires fit with a 2 inch lift and if not how much modifaction ould i need to make it work Link to comment Share on other sites More sharing options...
max_stryker Posted May 15, 2006 Share Posted May 15, 2006 15x8 wheels with 3.75" of BS to clear the bottom of the strut tower. that and the lift are the only mods you'd need. Link to comment Share on other sites More sharing options...
XPLORx4 Posted May 15, 2006 Share Posted May 15, 2006 You might also need to remove your front mudflaps and roll the upper lip of the rear fender. Link to comment Share on other sites More sharing options...
vengeful Posted May 15, 2006 Share Posted May 15, 2006 I've got the configuration styker referred to, and I've only had to do some minor trimming. Works great, too. Though, my tires were slightly smaller than 32" when new. Link to comment Share on other sites More sharing options...
max_stryker Posted May 15, 2006 Share Posted May 15, 2006 whatever u do...dont get a 15x10 wheel...if you do say buy bye to steering Link to comment Share on other sites More sharing options...
Guest youngpathy Posted May 16, 2006 Share Posted May 16, 2006 what do you mean by rolling the rear fender sorry i am completly new to this type stuff but i'll make it work Link to comment Share on other sites More sharing options...
vengeful Posted May 16, 2006 Share Posted May 16, 2006 Geared towards BMWs, but it's a good source. http://www.bmwdiy.info/fender-rolling/index.html Link to comment Share on other sites More sharing options...
XPLORx4 Posted May 16, 2006 Share Posted May 16, 2006 Geared towards BMWs, but it's a good source. http://www.bmwdiy.info/fender-rolling/index.html Yeah, that's it. Except I used a baseball bat (much cheaper) to roll my fenders. Link to comment Share on other sites More sharing options...
vengeful Posted May 16, 2006 Share Posted May 16, 2006 Yep....you can also use a piece of ABS or PVC pipe, too. How did the baseball bat work for you with the lift? I've got what seems like a ton of wheel gap, so I dunno how it'll work. Thinking I should get some 3" PVC or something to use instead....I dunno. Link to comment Share on other sites More sharing options...
XPLORx4 Posted May 16, 2006 Share Posted May 16, 2006 I actually had to articulate the rear axle a bit to get the wheel to stuff so I could use the baseball bat. (Put opposiing corners on ramps.) There's too much room between the tire and the fender otherwise. Link to comment Share on other sites More sharing options...
vengeful Posted May 16, 2006 Share Posted May 16, 2006 Yeah, that's what I was thinking.... I wonder how a 4" PVC pipe would work... Link to comment Share on other sites More sharing options...
4x4le Posted May 18, 2006 Share Posted May 18, 2006 use a 265 75 16 with a 16x7 and 4" bs wheel and forget about the baseball bat. that is a 32x10.5 That is too close for comfert in some spots but in that pic it is at full tuck, It wont go any farther up than that. As close as 1cm in spots! Link to comment Share on other sites More sharing options...
navygz19 Posted May 18, 2006 Share Posted May 18, 2006 Geez 4x4le...you have a beautiful Pathy.,.. Link to comment Share on other sites More sharing options...
OR99.5Speed Posted May 18, 2006 Share Posted May 18, 2006 Geez 4x4le...you have a beautiful Pathy.,.. Agreed...where in TN are you? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now