gabod7 Posted June 30, 2005 Share Posted June 30, 2005 somebody help me with this problem. i dont know what this is and how it broke. also, what do i need to do to fix it. its starting to turn the side of my engine bay black! Link to comment Share on other sites More sharing options...
Kn0xville Posted June 30, 2005 Share Posted June 30, 2005 that pic is a tad to close for me to figure out what im looking at. Maybe a far away pic with an arrow poiting to it? Link to comment Share on other sites More sharing options...
Precise1 Posted June 30, 2005 Share Posted June 30, 2005 Ditto Bud... And at 300k I had to wait a minute for something I couldn't identify... B Link to comment Share on other sites More sharing options...
mudfinder Posted June 30, 2005 Share Posted June 30, 2005 can't figure out what it is. where is it? what is it? what happens? take another picture, but futher. Link to comment Share on other sites More sharing options...
M in KC Posted June 30, 2005 Share Posted June 30, 2005 Way black with sooth, oil, other??? Link to comment Share on other sites More sharing options...
TrailChaser Posted June 30, 2005 Share Posted June 30, 2005 I brightened it up a little and still can't tell... Link to comment Share on other sites More sharing options...
Mookie Posted June 30, 2005 Share Posted June 30, 2005 Can you let us know approx where this is located? Drivers side? Passenger side? Top? Bottom? It is near the_____or beside the ______ Thnx! Link to comment Share on other sites More sharing options...
madhatter_xe Posted June 30, 2005 Share Posted June 30, 2005 That looks like the AIV assembly on the front driver side fender. Is that an AC line of some kind? Link to comment Share on other sites More sharing options...
gabod7 Posted June 30, 2005 Author Share Posted June 30, 2005 its right in front of the engine bay Link to comment Share on other sites More sharing options...
Slick Posted June 30, 2005 Share Posted June 30, 2005 is that the charcoal cannister for the blow by??? Did it break off or fall off? Is that all metal pipe or does it have rubber? If it's rubber hose..just buy some hose n fix'er up..if it's metal.. maybe you can get a section of tubing and fix it..or go to an auto parts store and ask them if they have it in stock... Link to comment Share on other sites More sharing options...
norcaljoe Posted June 30, 2005 Share Posted June 30, 2005 Mine broke same spot. The rubber just crumbled on mine. if i remember correct I used heater hose to replace it. Link to comment Share on other sites More sharing options...
mws Posted July 1, 2005 Share Posted July 1, 2005 Yup, that's the Air Injection Valve. I think a piece of heater hose would work just dandy to repair it. Link to comment Share on other sites More sharing options...
hardwaretoad Posted July 1, 2005 Share Posted July 1, 2005 Looks to me like it has an electrical tape fix on it already... maybe it's just oil or something. You can see it's a barbed hose fitting, simply replace with the appropriate sized hose... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now