TheFatMacgyver Posted February 1, 2015 Share Posted February 1, 2015 My Exhaust hangars are really haggard and need some attention. I had to weld a new muffler in because mine fell off due to rust lol. My question is, can the hangars on the frame rail be replaced? I just don't want the rust to spread because this is really the only rust on the car. Any advice would be appreciated. Thanks in advance. Link to comment Share on other sites More sharing options...
RF600 Posted February 1, 2015 Share Posted February 1, 2015 An exhaust shop can fix you up if you can't do it yourself. Some of the hangers can be purchased from the dealer. Link to comment Share on other sites More sharing options...
adamzan Posted February 1, 2015 Share Posted February 1, 2015 Ypu can buy all the hangers from rock auto or any parts store. Link to comment Share on other sites More sharing options...
TheFatMacgyver Posted February 1, 2015 Author Share Posted February 1, 2015 I looked on rockauto and i work at advance so I checked there system and the hangars that they list are not the same ones that are on my truck. This pathfinder is a California car and made its way all the way to nc so I think it being from Cali may have something to do with the odd hangars. Link to comment Share on other sites More sharing options...
Slartibartfast Posted February 2, 2015 Share Posted February 2, 2015 Kind of depends on how much of it's broken, how original you want it to be, and the tools at your disposal. I broke a stud off of one of my hangers, and found that I could just unbolt the broken hanger from the frame and weld a new bolt on where the stud used to be. The bracket that held it to the exhaust pipe was shot too, so I just welded up a new one out of scrap metal from a bed frame. I think it turned out pretty well; I actually like it better than the pipe clamp sort of deal that the exhaust shop put on there in the first place. Can you get a picture of which hanger/hangers you're looking at? Link to comment Share on other sites More sharing options...
ahardb0dy Posted February 2, 2015 Share Posted February 2, 2015 This is the page from Nissan FAST for a 4x4 WD21 pathfinder, which hanger (s) do you need? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now