MY1PATH Posted May 11, 2008 Share Posted May 11, 2008 What does the factory sevice manual say for the 4wd compression/tension rod bushings? I went and got energy suspension bushings for them but now I find the factory bushing cups are shot. I heard somwhere that they are originally tacked in place. does it say anyting about that or do I just new cups from nissan and slide them in? Link to comment Share on other sites More sharing options...
88pathoffroad Posted May 11, 2008 Author Share Posted May 11, 2008 Doesn't say anything about 'em. Sorry. Other people are using a pair of big bearing races(?) IIRC to replace the rusted cups. Link to comment Share on other sites More sharing options...
MY1PATH Posted May 11, 2008 Share Posted May 11, 2008 Doesn't say anything about 'em. Sorry. Other people are using a pair of big bearing races(?) IIRC to replace the rusted cups. Bearing races DOH! I bet I coulda found those cheaper than $40 @ nissan. anyway do you know if these other ppl just slide them on the rod beteen the busshing and the frame and call it a day or do the weld them in place to prevent shifting of the rod? Link to comment Share on other sites More sharing options...
88pathoffroad Posted May 12, 2008 Author Share Posted May 12, 2008 I would think they need to be tacked on to keep the bushings from moving around too much. Link to comment Share on other sites More sharing options...
Red87Path Posted May 22, 2008 Share Posted May 22, 2008 A detailed picture of the vacuum daigram for the 87 z24i engine would be just awesome. the sticker is missing from my hood and previous owner put new vacuum hoses in, but im thinking he got them all wrong. Link to comment Share on other sites More sharing options...
88pathoffroad Posted May 23, 2008 Author Share Posted May 23, 2008 I hate to say it, but there is no vacuum diagram for either engine in my whole FSM. There's a diagram showing where all the emissions control parts go but no routing diagram. My Chilton's doesn't show it either. Honest to God, I just leafed through every section even remotely pertaining to engines. Link to comment Share on other sites More sharing options...
Red87Path Posted May 23, 2008 Share Posted May 23, 2008 I hate to say it, but there is no vacuum diagram for either engine in my whole FSM. There's a diagram showing where all the emissions control parts go but no routing diagram. My Chilton's doesn't show it either. Honest to God, I just leafed through every section even remotely pertaining to engines. Thats great. A nissan mystery. my hanes manual doesnt have the diagram for this engine with the throttle body. shows all the carburated models. but not mine, even checked on autozone.com, but no dice there either. chit. Link to comment Share on other sites More sharing options...
Red87Path Posted July 19, 2008 Share Posted July 19, 2008 Thats great. A nissan mystery. my hanes manual doesnt have the diagram for this engine with the throttle body. shows all the carburated models. but not mine, even checked on autozone.com, but no dice there either. chit. found it, 2 of them actually if anyone needs them, Link to comment Share on other sites More sharing options...
Red87Path Posted July 19, 2008 Share Posted July 19, 2008 oh yea, forgot why i came on here start with, i need a wiring diagram for 87 z24i. my idle and acceeration problem been tracked down to a short, so i need a good diagram to trace wires with. Link to comment Share on other sites More sharing options...
Red87Path Posted July 23, 2008 Share Posted July 23, 2008 oh yea, forgot why i came on here start with, i need a wiring diagram for 87 z24i. my idle and acceeration problem been tracked down to a short, so i need a good diagram to trace wires with. wiring diagram for 87 z24i? bump Link to comment Share on other sites More sharing options...
Precise1 Posted July 25, 2008 Share Posted July 25, 2008 VERY few people here have the Z24 motor so I don't expect a fast response. Have you tried web searches? B Link to comment Share on other sites More sharing options...
88pathoffroad Posted July 26, 2008 Author Share Posted July 26, 2008 wiring diagram for 87 z24i? bump Wiring for what? They have separate diagrams for each system. Link to comment Share on other sites More sharing options...
Red87Path Posted July 26, 2008 Share Posted July 26, 2008 Wiring for what? They have separate diagrams for each system. nevermind, i paid the 27 bucks to access alldata got all the info i could ever need for this truck 1 Link to comment Share on other sites More sharing options...
Jocoracing Posted September 6, 2008 Share Posted September 6, 2008 So i just called nissan directly trying to get my own FSM, I have a '87, but the lady said the oldest she had was an '88. I'm into pathfinders, so would the '88 book work for me? Link to comment Share on other sites More sharing options...
Jocoracing Posted September 6, 2008 Share Posted September 6, 2008 Sprry i meant i'm new into pathfinders Link to comment Share on other sites More sharing options...
88pathoffroad Posted September 6, 2008 Author Share Posted September 6, 2008 The 88 manual should be good for 99% of the stuff on there. Link to comment Share on other sites More sharing options...
Jocoracing Posted September 6, 2008 Share Posted September 6, 2008 Thanks a bunch really appreciate it Link to comment Share on other sites More sharing options...
Jocoracing Posted March 9, 2009 Share Posted March 9, 2009 i need a heater core removal guide, do you have it in the book? Link to comment Share on other sites More sharing options...
88pathoffroad Posted March 9, 2009 Author Share Posted March 9, 2009 The FSM shows it's location but not specifically how to remove it. Here: http://nissan.damagedreality.com/FSM/ha-2.jpg http://nissan.damagedreality.com/FSM/ha-3.jpg Link to comment Share on other sites More sharing options...
Jocoracing Posted March 10, 2009 Share Posted March 10, 2009 The FSM shows it's location but not specifically how to remove it. Here: http://nissan.damagedreality.com/FSM/ha-2.jpg http://nissan.damagedreality.com/FSM/ha-3.jpg you are the man. its cold in tacoma and i have no heat so this helps a bunch Link to comment Share on other sites More sharing options...
Scottzilla Posted June 16, 2009 Share Posted June 16, 2009 (edited) Does the manual show how to pull codes from the TCU if you don't have an overdrive button? (I've only got a power button on the shifter) Thanks! Never mind. You can just use the Auto/Power button instead. Just make sure your TPS is hooked up right first! Edited June 17, 2009 by Scottzilla Link to comment Share on other sites More sharing options...
BigD21 Posted October 30, 2009 Share Posted October 30, 2009 (edited) Sorry for a mundane Q but can you tell me what the rear spring seat size and widths for the WNYD21 is as my lower rubber ones have perished and Ive found a guy selling 1.5in urethane lifty types on ebay for dog cheap. I did the fourum search and the v8 JGC is all that I can interpret to be the best fit?, in the good ole days I do remember someone saying the jeep cherokee front springs were interchangable with the WD21 rears, does anyone know from which model year exactly? or do I need to pull them and take them with me to the pull your own parts yard? for the full comparison Mine are a little saggy probably due to the rubber being totally shagged from my many off road adventures as well as their age, so Im thinking new(ish) springs and spring seats. just need to know thier dimensions before I go out to buy. Cheers and beers Edited October 30, 2009 by BigD21 Link to comment Share on other sites More sharing options...
Precise1 Posted October 30, 2009 Share Posted October 30, 2009 You have rubber isolators on the bottom?? Mine are only on the top... Here is everything you ever wanted to know about springs... http://www.nissanpathfinders.net/forum/index.php?showtopic=18&st=0 B Link to comment Share on other sites More sharing options...
BigD21 Posted November 4, 2009 Share Posted November 4, 2009 (edited) You have rubber isolators on the bottom?? Mine are only on the top... Here is everything you ever wanted to know about springs... http://www.nissanpathfinders.net/forum/index.php?showtopic=18&st=0 B Excellent info .. 5.25" (13.33mm) OD is around about what I get measuring from the base of the spring's using my cheap but almost precise chinese caliper. The guy on ebay I found sells a 15mm (5.90" to you guys)lift polyurethane set for the Nissan GU/GQ patrol But sadly he doesnt say anything about the IS & OS diameters I hope his gear works with my stock pathfinder springs IS - OS diameters it would get me out of trouble .. I'll Q him. I cant see if theres upper rubber isolaters but your advice and logic tells me that there is so if the ebay guy cant help me then I'm going to print the link info and head down to the Wreckers to do me some pulling proly think a firmer set sounds rational after all those hard corrugated trails we have here could do with some tempering. Cheers and beers Edited November 5, 2009 by BigD21 Link to comment Share on other sites More sharing options...
R3DN1CK Posted January 22, 2010 Share Posted January 22, 2010 I just bought a FSM for the 1990 Pathfinder. Let me know if anyone needs info from it. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now