Highlined fender flares

[PaMountianbiker]

Here is before

here is during

and afterhttp://i1191.photobucket.com/albums/z468/pamountianbiker/ca40d6fe.jpg[/img]"]http://

Edited May 10, 2012 by PaMountianbiker

[sroeser01]

where can i find these?

[devonianwalk]

Have you removed all of the plastic inner wheel well covers? I like the look BTW.

[PaMountianbiker]

yes I did remove them and haven't even tried to put them back. Mine is more of an offroad toy I barley drive it on the street anymore. I'm debating on getting a inspection this year???

[Wo0denSp0on]

Good thing about Arkansas...Inspectiowhat? ha! Looks good man...now what are you gonna do with the rear..

[XPLORx4]

where can i find these?

 

Do you mean where can you find the stock fender flares?

[PaMountianbiker]

Good thing about Arkansas...Inspectiowhat? ha! Looks good man...now what are you gonna do with the rear..

Not sure yet ???? I might be ok with the rear it will have 7 inches of up travel if I try to keep it as is. i can bump stop it and just have a ton of down travel ??? lots of stuff in the driver wheel well to move but I'm thinking about it

[Wo0denSp0on]

Yea. You may can move em up a little not quite as much as the front. If you're scared just say so!

[sroeser01]

im looking for those fender flares i need them for inspection, right now i have pacer flexy flares and those look better would like them...

[linkinpark]

That looks pretty sweet. It would be nice to find some after market flares that could fit so that there isnt that much space left on the bottom of the flare.

[devonianwalk]

That looks pretty sweet. It would be nice to find some after market flares that could fit so that there isnt that much space left on the bottom of the flare.

 

Actually, I think the extra space gives the fender a more dramatic visual "height".

[PaMountianbiker]

There is no fender left under the flare I cut it off all you see is the body I need this room for my 37's. In fact I might have to cut the slider too about an inch.

[devonianwalk]

Yikes! It looks like an inch off of the slider will take it to the weld.

[linkinpark]

There is no fender left under the flare I cut it off all you see is the body I need this room for my 37's. In fact I might have to cut the slider too about an inch.

Oh it was hard to tell. Almost looks like some fender left but after squinting I can see its gone.

[PaMountianbiker]

Yea. You may can move em up a little not quite as much as the front. If you're scared just say so!

I started on the rear ones http://i1191.photobucket.com/albums/z468/pamountianbiker/9f8af545.jpg[/img]"]http://

Edited May 13, 2012 by PaMountianbiker

[PaMountianbiker]

Folding the fender over the inner

http:/http://i1191.photobucket.com/albums/z468/pamountianbiker/c31c42fd.jpg[/img]"]http:///

Edited May 13, 2012 by PaMountianbiker

[PaMountianbiker]

almost there

http://i1191.photobucket.com/albums/z468/pamountianbiker/7fdb10c4.jpg[/img]"]http://

[devonianwalk]

I like how you did that (had to be time consuming). Can't wait to see a pic with the wheels installed.

[PaMountianbiker]

maybe tomorrow

[Inyourface1650]

so are those the stock fender flares? or aftermarket flares?

Edited May 14, 2012 by Inyourface1650

[devonianwalk]

Stock flares. He cut the fenders to accommodate ginormous tires.

[PaMountianbiker]

LOL

[MrT]

I'm debating on getting a inspection this year???

 

I don't know how the cops are in your part of the woods but in mine they haven't batted an eye. I'm about a year past due and mine's a DD. If you get stopped 9 chances out of 10 they give you a warning that turns into a ticket if you don't get it inspected in 2 weeks. Just keep up the registration and you should be fine.

[01silvapathy]

Looks kinda like what I did to mine minus putting back on the flares

 

Before

 

After

[01silvapathy]

And on a side note I really like how you decided to do the rear I think that next time im bored and have some time ill wind up doing the same thing. I thought about it but I couldnt figure out how it would wind up looking. Thanks for being the guinea pig....thats usually my job lol