ebag17 Posted October 2, 2009 Share Posted October 2, 2009 My pathfinder was in a slight front in collision. My question is for someone who has the arb bumper and i would like to know how it attaches. Does it use those two factory brackets that stick out to hold the original bumper on? Thanks for your time. -G Link to comment Share on other sites More sharing options...
nunya Posted October 2, 2009 Share Posted October 2, 2009 I don't have one but would think the ARB to have something a little more stout than the factory brackets. Link to comment Share on other sites More sharing options...
RedPath88 Posted October 2, 2009 Share Posted October 2, 2009 Mine is not mounted the original way the upper mounts was designed but iirc you completely remove the stock bumper brackets and the ARB bolts to the frame where the brackets did. But the primary mounting point is at the fram using the two mounting holes (per side) where the factory tow hook is. Link to comment Share on other sites More sharing options...
kiwipete Posted October 3, 2009 Share Posted October 3, 2009 Mine is not mounted the original way the upper mounts was designed but iirc you completely remove the stock bumper brackets and the ARB bolts to the frame where the brackets did. But the primary mounting point is at the fram using the two mounting holes (per side) where the factory tow hook is. Just a quick question re where it mounts where the old bumper iron were, does it use the same bolt pattern and both bolts on both sides? I'm asking because I am in the process of fabbing a new tubular winch bar and want to use this same mounting setup. Thanks. Link to comment Share on other sites More sharing options...
ebag17 Posted October 3, 2009 Author Share Posted October 3, 2009 Thanks that answered my question. -G Link to comment Share on other sites More sharing options...
GrimGreg Posted October 4, 2009 Share Posted October 4, 2009 Just a quick question re where it mounts where the old bumper iron were, does it use the same bolt pattern and both bolts on both sides?I'm asking because I am in the process of fabbing a new tubular winch bar and want to use this same mounting setup. Thanks. No, it only uses the upper frame mount. Here you can see the mounts (just before I chopped em ): Link to comment Share on other sites More sharing options...
kiwipete Posted October 4, 2009 Share Posted October 4, 2009 Cool, thanks. That's just what I was looking for. I have a plan.......... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now