TerranoNZ Posted March 5, 2012 Share Posted March 5, 2012 That's right Sorry Adam, I forgot all about you I found my switch too, just need some wire Link to comment Share on other sites More sharing options...
Dowser Posted March 5, 2012 Share Posted March 5, 2012 Hey Tex! hahah Ya, I'm easy to forget. Unless you've slept with me then I'm just down right Unforgettable... In a good way....... I think. ANYWAY..... Thanks man. I appreciate the help. I don't think that our rigs even came with the connector on the wiring loom so unless its the same as any of the other buttons, I'll need the male end of the connector. If it's the same as the others then I'll just grab one locally here with wire to save you hassle. You're a good guy Tex, I don't care what everybody all over the internet is saying. Link to comment Share on other sites More sharing options...
jadm4x4 Posted March 6, 2012 Share Posted March 6, 2012 (edited) hey dowser. from memory the washer bottle switch for us was loated on the center console Edited March 6, 2012 by jadm4x4 Link to comment Share on other sites More sharing options...
TerranoNZ Posted March 12, 2012 Share Posted March 12, 2012 hey dowser. from memory the washer bottle switch for us was loated on the center console On the square dash yes.... On the round dash right under the heater vents Link to comment Share on other sites More sharing options...
shermo Posted April 19, 2012 Share Posted April 19, 2012 TAREE NSW Link to comment Share on other sites More sharing options...
Leo94 Posted April 19, 2012 Share Posted April 19, 2012 Brisbane, Qld Link to comment Share on other sites More sharing options...
jadm4x4 Posted April 21, 2012 Share Posted April 21, 2012 welcome guys. not to many of us aussies on here anymore. but welcome. im in melbourne Link to comment Share on other sites More sharing options...
Cyril Posted April 30, 2012 Author Share Posted April 30, 2012 Howdy all , Only SAD news to bear , The Pathy rolled and wont be comming back to life , so for all of you that want upgrade bits contact me on 0408988808 hope to be updating pics in members rides Link to comment Share on other sites More sharing options...
kiwinoz Posted May 6, 2012 Share Posted May 6, 2012 Cyril, I saw your post awhile back about your pathy with the 3.8, looked like a nice rig. Are you not planning to swap all the bits to a new one? I'd like a bull bar like yours, was it ARB? Katherine NT Link to comment Share on other sites More sharing options...
Cyril Posted May 6, 2012 Author Share Posted May 6, 2012 Hey Man , Have bought an 80 series Land Crusier , so no need for Pathy parts now . Am getting rid of whats left soon so if you want any parts let me know really soon . The Bull bar was one of my creations and worked very well with even heavy winch loads on it . The bars for sale too . Was in Katherine last june , did the helicopter gorge thing . Link to comment Share on other sites More sharing options...
kiwinoz Posted May 8, 2012 Share Posted May 8, 2012 wow, so close. I saw your pics, I have the same colour pathfinder, and have pics in some of the same places as yours, lol. But mine isn't bent. My wagon has no tacho, would you sell your instrument cluster? Might cost too much in friehgt for the bullbar. Link to comment Share on other sites More sharing options...
Cyril Posted May 9, 2012 Author Share Posted May 9, 2012 wow, so close. I saw your pics, I have the same colour pathfinder, and have pics in some of the same places as yours, lol. But mine isn't bent. My wagon has no tacho, would you sell your instrument cluster? Might cost too much in friehgt for the bullbar. Im in Newcastle < NSW , so if you work out postage and then how much you want to pay , i'll remove it for you and send it your direction .. PM Me Link to comment Share on other sites More sharing options...
wax Posted May 9, 2012 Share Posted May 9, 2012 Gold coast checking in here Link to comment Share on other sites More sharing options...
Leo94 Posted May 10, 2012 Share Posted May 10, 2012 Sweet another Terrano that's near by Link to comment Share on other sites More sharing options...
bobnmas Posted May 25, 2012 Share Posted May 25, 2012 I'm Bob, from Shoal Bay NSW. Link to comment Share on other sites More sharing options...
88pathdiversam Posted May 28, 2012 Share Posted May 28, 2012 gday everyone,im from tassie,new to 4wding and have started with an 88 pathy,so far its purred like a kitten but havin been able to fully test it out yet but im sure it wont disappoint me from what ive seen from people on here and there u tube clips,great stuff. have been looking for a few parts,which seem fairly hard to get hold of down here so if anyone is wrecking any pathys 88 to 95 id love to hear about it.also got few questions for anyone who is pretty clued in on the 88s and z24 carb motors,i can be contacted by email or ph. thanks .sam from tasmania. Link to comment Share on other sites More sharing options...
Nickj Posted May 28, 2012 Share Posted May 28, 2012 G'day boys Nick from West Gippsland in Victoria. I've been 'round here for a while but not too regular with the visits. Welcome. Nick Link to comment Share on other sites More sharing options...
jadm4x4 Posted May 30, 2012 Share Posted May 30, 2012 guys. ive had the good old z24 in 2 of my pathys. easy advice. rip that sucker out and grab some more power. Link to comment Share on other sites More sharing options...
Cyril Posted May 30, 2012 Author Share Posted May 30, 2012 Getting rid of my parts REALLY CHEAP if anyone wants them . Link to comment Share on other sites More sharing options...
kiwinoz Posted June 11, 2012 Share Posted June 11, 2012 Posted 30 May 2012 - 12:52 PM guys. ive had the good old z24 in 2 of my pathys. easy advice. rip that sucker out and grab some more power. WHat did you replace them with? Link to comment Share on other sites More sharing options...
MCrowe Posted July 2, 2012 Share Posted July 2, 2012 (edited) So where do us ozzies go to buy parts for our pathfinders? After market upgrades that is. America? I took my Pathy for a drive in the dunes in SA and accidently jumped it about 10m... Could have happened to any one, but now my steering really sucks. Considering how busted it is, I'd happily pay for the Calmini Heavy Duty steering kit, except it doesnt work on RHD's. Any one got any suggestions? And I know everyone says the Grassroots kit from US but are there any other options. Whats every one else done? Or is everyone using stock steering parts? Melbourne Vic. Oh yeah, and here is a video of my car. Not thats its the main attraction. Edited July 2, 2012 by MCrowe Link to comment Share on other sites More sharing options...
jadm4x4 Posted August 4, 2012 Share Posted August 4, 2012 Vg33 Link to comment Share on other sites More sharing options...
95TERRA Posted September 3, 2012 Share Posted September 3, 2012 Hi to all you other aussies on here am hoping someone can help me out, my 95 terrano has started passing abit of oil through the turbo compressor, it drips onto the heat shields on the mani, thing is I cant for the life of me work out what model turbo it is as I cant seee any markings etc... it has a 3 bolt flange where the inlet pipe bolts up then another 3 bolt flange where the outlet goes into a 45 degree piece before a rubber hose joins it to the crossover. will upload a pic if it helps cheers all Link to comment Share on other sites More sharing options...
95TERRA Posted September 3, 2012 Share Posted September 3, 2012 So where do us ozzies go to buy parts for our pathfinders? After market upgrades that is. America? I took my Pathy for a drive in the dunes in SA and accidently jumped it about 10m... Could have happened to any one, but now my steering really sucks. Considering how busted it is, I'd happily pay for the Calmini Heavy Duty steering kit, except it doesnt work on RHD's. Any one got any suggestions? And I know everyone says the Grassroots kit from US but are there any other options. Whats every one else done? Or is everyone using stock steering parts? Melbourne Vic. Oh yeah, and here is a video of my car. Not thats its the main attraction. [media=] [/media] try ebay, I just got a new set of ball joints for my terrano for $300 cheaper than quoted here, will let you know how they hold up Link to comment Share on other sites More sharing options...
smokes1 Posted October 20, 2012 Share Posted October 20, 2012 Hi I'm from Perth WA. Just recently bought a pathfinder. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now