35's On Ifs

[giancarlo93]

Have someone put 35's with IFS?

What have you changed?

Any problems?

[Slick]

hell, my 33's rub with 7" of lift

[Simon]

It's been done. A guy local to me has run them. A LOT of trimming is necessary.

[giancarlo93]

My 33x12.50 runs with no problems.

I think the wheel offset makes a lot of difference.

Here in Panama theres another lifted pathfinder with 33's but his wheel offset push the wheels out to much and he had to trim a lot to get rid of rubbing.

 

I want to know if the front suspension will hold?

What mods I have to do to the suspension?

[Simon]

The front suspension will hold, however, you'll go through a few more balljoints, I'm sure. The steering, (if I remember correctly, you're running 35's) should be okay, again, though, you may go through tie rods a little more often.

 

I'd be more concerned, if anything with our little V6 pushing that truck around on 35's.

[Enjoi408]

Theres a video on youtube with a pathfinder on 40's. 35's is possible.

[GrimGreg]

I'd be more concerned, if anything with our little V6 pushing that truck around on 35's.

 

IIRC he's 4banger. The Hardbody guys do it with their 4 cylinders though.

[Casey.T]

*Kicks GG.... I was gonna mention that this Pathy is a 4banger.....

 

With 35s depending on the off-set and width of the tire will determin how much trimming gets to be done... Because this is not a mall crawling Pathy, i would think he will require more trimming... That or figure out a way to drop the front Diff another 2 or 3"....

[Slick]

what size are your 33's gianocarlo? i am runnin 4" bs with 33x12.5x15's.... and i rub my bushwhackers to hell wouldn't have it turning atta slight angle bent my fenders too

[Vsicks Pathy]

i am runnin 4" bs with 33x12.5x15's.... and i rub my bushwhackers to hell wouldn't have it turning atta slight angle bent my fenders too

 

Are your tyres are sticking out past the guard/fender, and causing them to foul on your body work? Perhaps 12.5 is too wide Slick?

 

I have 33x10.5x15 and no problems.

[giancarlo93]

33x12.50

15x7 wheel

-12.8 mm offset

[nige]

what brand and model wheel do you have Carlos?

Edited August 15, 2007 by skrillaguerilla

[giancarlo93]

I dont remember what brand are they.

I bought them 14 years ago.

 

 

 

 

[Slick]

yeah, see, you're running a much narrower tire than i am.. my rims are 15x10, tires 33x12.5x15. so yes, them buggers stick out some. nothing the sawzall can't handle, but other more important stuff to handle first.

[sammyb33]

wow. why are you running a 15x10 wheel slick? seems pretty pointless to me, just puts more wear on your steering components when u could just be running 15x8s with slightly more backspacing to tuck them in a bit more....