Breton Posted May 13, 2007 Share Posted May 13, 2007 Hey All... Well recently i just blew up my stock V6 outta my 95 Pathy... So ive decided to drop a 350 into it. Just wondering if anyone here has done that yet.. and if so, what kind of problems should i expect to see... thanks Link to comment Share on other sites More sharing options...
PATHRIDER Posted May 13, 2007 Share Posted May 13, 2007 88path has a site that has a pathy with a 350 Link to comment Share on other sites More sharing options...
BLouisGod Posted May 14, 2007 Share Posted May 14, 2007 Well, 1st off you should get better mpg than the previous v30 Link to comment Share on other sites More sharing options...
mattd123 Posted May 14, 2007 Share Posted May 14, 2007 clearence is a huge problem its gonnta be tight then there is the tranny and then electronics. i have a 94 chrystler concord, blew the 4 cyl engine and dropped in a 302 from a chevy and thats what we ran into. Link to comment Share on other sites More sharing options...
88pathoffroad Posted May 14, 2007 Share Posted May 14, 2007 Engine mounts/trans mounts need to be fabbed Exhaust headers/manifolds are very tight Little to no radiator clearance Distributor clearance at firewall Speedo/cable/sensor won't match Chevy trans If you go with a full Chevy drivetrain, you also get to mod both driveshafts I dunno, there's a lot of things to be done for a 350 swap to work. Just takes time and money. Link to comment Share on other sites More sharing options...
87pathmaker Posted May 14, 2007 Share Posted May 14, 2007 Just do a sas at the same time, prolly make it easier Link to comment Share on other sites More sharing options...
unccpathfinder Posted May 14, 2007 Share Posted May 14, 2007 if that looks like too much work/cost...i've got a vg for sale...all u need to do is swap out u're intake and u'll be good to go Link to comment Share on other sites More sharing options...
aries247 Posted May 15, 2007 Share Posted May 15, 2007 why not just put a 4.3 v-6 out of a s-10 in. perhaps there won't be as many clearance issues. that's what i'm planning when my engine goes. just my .02. Link to comment Share on other sites More sharing options...
ILoveMyPatty Posted May 19, 2007 Share Posted May 19, 2007 When my engine goes.... actually, just did kinda... I'm thinking of a VG30ET Link to comment Share on other sites More sharing options...
Spolar93 Posted May 20, 2007 Share Posted May 20, 2007 im plannin on stroking a ford 5.0 to 347 and runnin bbq juice through it Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now