nismothunder

So I've added a transmission cooler and relayed my headlights. Wonder what other things need "fixing" that should have been taken care of at the factory.

So I've added a transmission cooler and relayed my headlights. Wonder what other things need "fixing" that should have been taken care of at the factory.

So I've added a transmission cooler and relayed my headlights. Wonder what other things need "fixing" that should have been taken care of at the factory.

So I've added a transmission cooler and relayed my headlights. Wonder what other things need "fixing" that should have been taken care of at the factory.

Apparently timing belt tension seriously affects drive-ability. My truck feels more alive than ever before. Got to love timing belts.

I want to work on my truck, but these trips out of town make that difficult! Anywho, headed to SLC in the next few hours, weeeee.

Inflated from 26 psi to 36... haven't driven it yet, but if the massive reduction in sidewall bulge is anything to go by, it should handle a little better now!

The Ford Taurus 3.8 equipped electric cooling fan fits perfectly inside the factory Nissan fan shroud.

After removing .7 million vac lines, tb, steering pump, alty and fuel lines I have been stoped by a damn T40 torx bolt. Now I have a 3/8 T40, but it dont fit snug. I need a 1/4...

These VG30E timing belts are so easy to do and people complain...

Gates water pumps suck. Going back to Nissan.

Gates water pumps suck. Going back to Nissan.

It's the summer of love! Just ordered tune up parts, wipers, liftegate struts and will be decideing on new tires soon. Mwa ha ha ha!

I love how easy it is to change the v-belts on a WD21.

why is the stock exhaust diameter so small?

Emails been hacked again. WTF yahoo?

any suggestions for an aftermarket transfer case or is a tx-10 sufficient

who ate all the lucky charms?

Making Jeep people jealous.

Nissan Y U NO keep the same taper?

Just picked up an '83 F-150. Just like I had in high school. Don't worry keeping my Pathy

Why do people think brake fluid doesnt need tobe changed? I mean its not meant to be black and gooey.

thought i was one of the chosen few with no auto hub troubles.......I was wrong

Welded up some proper exhaust hangers for my custom 2.5 inch exhaust today. Now it's in there nice and tight. Also welded up the floor of my sisters Chevette.... one of the front seat bolts tore off bringing a 3x3 piece of sheet metal with it...sigh....

Damn Pulling this engine has been a major pain in My A$$. VG33E is going to be worth it!! On another thread here someone said"There is no replacement for Displacement".