Slick

http://www.nissanpathfinders.net/forum/index.php?showtopic=5948

i was kidding. i think i have enuff pathy's...... lol but maybe in the future..hmmmmm

ahhhhhh...... good to know *goes hunting for a 93*......

on a wd-21, NO, the belts will NOT last 150k........ they should be changed every 65k.......... for the r-50 i believe it's every 105k... a pathy will last as long as YOU want it to. there are 3 members i know of with over 500k on their original trucks..... if it is well maintained, not tortured and abused, they can last a loooooooong time, which is what makes them such great trucks

if i remember right, the torque specs are between 11-14 ft lbs dontcha hate dangling wires?

i'd let the shop do the rebuild then. but she'll be out of commission fer a while.........

no chance of you doing the work yourself?

count how many actual coils are on them, and the thickness of the coil itself...... or compare them to the above mentioned manufacturers.

or oyu lost a wheel weight and that's it's preferred wobble speed....

i think a/c's lift coils are red. not 100% sure tho. blue is calmini. black is factory/basic after amrket

them there them new "invisirims"??

PB blaster is your FRIEND.......... really

14mm.. nissan's are METRIC

how fast is 125kph in mph? then maybe i can figure it out lol

craptastic tires can be the death of any wheeler, especially in snow. doesn't matter what you have, if oyu have crappy tires, chances are you could have a jeep built to the hilt n not do any good. tires are everything. (driver skill helps too) when they laugh and cap on your pathy, just smile.... cuz i bet you paid HALF for your pathy what they paid for their rigs, rest assured the pathy will last WAY longer than anything they drive, and not everyone has one and i haven't found anyone dumb enuff to tell me my pathy's suck....... they'd die, plain n simple.

well, i dunno how far a KM is, but i know all pathy's get pretty crap gas mileage (14-19mpg)... and i know i USED to get 300-325 miles out of a tank of gas......... now i'm lucky if i get 280

looked like dan's r-50 int he backround on that one pic......... yeah, recognized a few members rigs.......

*has flashback to king*. checked yer injector wires/injectors?

i measured when i took the carrier off, then after the coils were installed, she went up 3/4" just taking the carrier off (stock everything)..... but i also had stock shocks then too, now i run rancho 5000's (put those on with the JGC's) I also did a t-bar crank after the install also beofre n after's.......

HAD a tire carrier. took it off. used brand new JGC coils, got 3 & 3/4" of lift on Mini Me..... after 2 years they are still excellent, even after wheelin, and LOTS of miles. we did find for some reason my coils were a slightly different design to the average JGC coil..... that may have had something to do with why i got so much lift, when the average is 2-3" FYI, i paid $30 more for NEW coils than the JY's were askin. kragen P/N: PA 8360513 (FCS782V) i paid $70 for em

thanks tex, didn't think so. they told summit they had no intention of making a 28 spline hub.....

per our PMs and conversation in your other thread..... you know my opinion. weekend warrior. MM's are best bang for the buck hardcore every weekend: warn's call superwinch to find out if they MAKE a 28 spline hub now, cuz they didn't 18 months ago, even summit racing got the shock.... oh, and summit have MM's for $85 shipped, warns for $143 shipped

SUMMIT RACING. i got my MM's for $85 they had warns for $143 also, go to ruggedrocksoffroad.com (steevO's site)........ and, unless SW JUST started makign hubs for ourr pathy's. then they DO NOT make 28 spline hubs. even summit racing had them down for 90-95's. but they were 31 spline hubs. didn't fit, summit was great n shipped my MM's out same day, and sent me a UPS label for the SW's......

oh! i am flattered! i have never been called "buddy" before.. b!tch yes, buddy no lol. if it was a motor mount, it wouldn't have the metal sound, and you wouldn't feel it under your feet... $50 says yer exhaust just wiggled loose n needs some "adjusting"