Jump to content

Stpickens

Members
  • Posts

    114
  • Joined

  • Last visited

  • Days Won

    17

Everything posted by Stpickens

  1. It sounds like you may have a fuel vent breather issue or the fuel pick up has dislodged. I can attest that these will use 20.1 gallons before they start to sputter. Tested it out last week to be exact, not on purpose. Sent from my iPhone using Tapatalk
  2. I still haven’t fixed my odometer light either [emoji23] and I have everything to do it. Sent from my iPhone using Tapatalk
  3. It’s an extreme leds lightbar. Sent from my iPhone using Tapatalk
  4. Mine would be the one on Facebook with the 3” sfd. I will let the pines to spines guys explains the technical parts. The sfd strut mounts do fix the camber issues beautifully. You essentially need to get the full 4” sfd kit to utilize the full benefits. Like leveling out the cv axles back to factory angles. With any spring lift you have on the struts you will keep that going into the added height of the sfd. So if you have +2” springs and then add a 4” sfd you’ll net a total of 6” over factory height. My current set up: OME Struts OME Springs 3”sfd 7449 Landrover springs. All this equals + 4.75” over factory height. Sent from my iPhone using Tapatalk
  5. Pines to spines 3” sfd OME had struts and springs LR9449 rear springs. Sent from my iPhone using Tapatalk
  6. Looks great! Sent from my iPhone using Tapatalk
  7. I am ready for the sfd kit whenever you are. [emoji1303] Sent from my iPhone using Tapatalk
  8. His rig is pretty sweet. I can’t wait to get him out on the trail. [emoji1303] Sent from my iPhone using Tapatalk
  9. Big booty. Sent from my iPhone using Tapatalk
  10. 15.5 mixed with traffic. And 18.75 freeway. Sent from my iPhone using Tapatalk
  11. We did a 72 mile off-road overnight trip. Sent from my iPhone using Tapatalk
  12. 02_Pathy and I installed my LR9449 springs last night. Sent from my iPhone using Tapatalk
  13. Got her ready for this summers adventures. Added lightbar, ditch lights, dust lights, and put the awning back on. Sent from my iPhone using Tapatalk
  14. Well it looks like Nissan Frontier Dutch light brackets from Rago Fabrication work without too much fuss. Only thing that needs outsourced is qty2. 7/16” round spacers. Now you’ll only use 1 bot to hold them on but they aren’t going anywhere. Total time of install about 30 min without fender removal. Sent from my iPhone using Tapatalk
  15. Did a little test fit of the ARB 2500 awning with the new to me Rolla rack. I am way happier with how it sits now vs my old rack on the factory crossbars. Sent from my iPhone using Tapatalk
  16. It’s custom. [emoji23] Sent from my iPhone using Tapatalk
×
×
  • Create New...