-
Posts
301 -
Joined
-
Last visited
-
Days Won
5
Content Type
Profiles
Forums
Calendar
Posts posted by RIPB.88
-
-
Shouldnt be a problem. If they suck in to much then just get some wheel spacers. And DONT get the ball joint spacers as they will cause problems. Better off to just get new UCA's.
-
The offset of the wheels is a HUGE factor. But running stock wheels shouldnt be too big of a problem to fit those.
-
PM Fluery. He make Strut spacers for pretty cheap. Many members here use them and I haven't heard of any complaints.
- 1
-
Corn field
-
Blow Torch
-
Its your Window Regulator. Easy replace. Working in a glass shop, I see that all the time.
-
Dragon Slayer
-
Went up to the mountains yesterday to go play. Found a small hill to park on. But unfortunately, its too early in the season and none of the trails are open yet.
-
Double dip
-
Quick question.
I have read that some folks run ball joint spacers with stock UCAs. Others, no ball joint spacers with aftermarket UCAs (Superlift). Then read a few who used ball joint spacers with aftermarket UCAs.
I am going to buy the Superlift UCAs for sure, just wondering if I still need and want BJS also? If yes, 1/2" or 1" ? Who sells some that work with Superlifts and would they need to be welded to the UCAs?
Thanks everyone!
Curt
DONT use ball joint spacers. You dont need them, especially if using new UCA's. They put more strain on parts and its not a good idea. The new UCA's help to fix the ball joint angle problem when raising your front end.
-
Power House
-
Slow and Steady and you'll be fine. Just remember you're not in a racecar.
-
Might also check the ignition switch itself. I had an S10 that had a similar problem and wouldnt crank all the time. Pull the shroud and wiggle the wires going into the ignition switch while you try to crank. Might be worth a shot.
-
River Rat
-
Mine is just mounted to my factory crossbars. Perhaps check your local j/y and see what they want for a factory rack. It wouldnt be all that hard to add it. Then problem solved.
-
Yakima Load Warrior with the 18" extension. Holds a lot of stuff and looks great.
-
Ha someone forgot to check that date.
-
A picture is worth a thousand words.
-
-
She did great on the drive yesterday, so just did an oil change.
-
speechless woman
-
Looks good. Gotta love a 2-door!
-
You can adjust them, but make sure you have distance between the bump stop or the ride will be terrible. You also will need to get re-aligned. Get new UCA's to help with the ball joint angle and you'll be fine. Superlift, for example, makes them.
-
Gut it and run new. Bose, IMO, sucks A$5. Easy to run all new.
hot hot hot
in 90-95 WD21 Pathfinders
Posted
Id say check all the above and rebleed your coolant system. You may have an air bubble.