- Sign In Changes: You now need to sign in using the email address associated with your account, combined with your current password. Using your display name and password is no longer supported.
- If you are currently trying to register, are not receiving the validation email, and are using an Outlook, Hotmail or Yahoo domain email address, please change your email address to something other than those (or temporary email providers). These domains are known to have problems delivering emails from the community.
CrazyLarry
-
Posts
19 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Everything posted by CrazyLarry
-
I call mine Pathmaker, Small trees are no problem. LOL
-
The crankshaft will have a large pilot bushing for the auto trans that will need removed before installing manual trans pilot bushing. I just did a auto to manual swap and discoverd this.
-
I have not rebuilt a vg30 yet, But i know with a SBC you soak them and pump them by hand using a push tube until no bubbles come out. vg30 not having push tube not sure if you can hand pump them.
-
IMO A Manuel gauge is better, But the pipe threads in the block are metric. I tapped mine 1/8 pipe tap and used a shop vac to suck out the metal shavings with the oil filter off to install a gauge. The words metal shavings and oil passage should never be in the same sentence! LOL I don't recommend this unless your damn sure all metal is removed!!!
-
My starter was doing the click click click click....then start thing, so I pulled the starter and changed the solenoid and it has worked great ever since.
-
Yes, it's the one next to the oil filter.
-
MR510 is exactly right about the twist and bump steer.
-
IF the motor still runs smooth its probably just normal condensation coming from exhaust. But I would have the oil leak fixed. While the motor is cold take the radiator cap off and make sure it is full of water and then start the engine with cap off and if water comes out the radiator in the first 30 seconds the head or head gasket is bad.
-
slade, That "second line" is just a vent line for the front diff and trany.
-
Tighten the manifold bolts might get you by for a while.
-
The black valve would indicate that cylinder is running rich or burning oil. You might check for a leaking injector or bad sparkplug or SPwire.
-
You might want to check the fusable links, they are located by the power steering resivore. mine hade a bad connection and had same problem you are having.
-
Yes, my own design, The drag link is 5/8 hiem joints and the tierods are 3/4 hiems with 5/8 high misalignment bushings. The only weak link is my hands,LOL If you stuff a wheel in a rock or ditch it will jerk the wheel out of your hands. The only draw back is the changed geometry will give about 2" of bumpsteer, but for off road only I dont notice it.
-
Spent about a day making my own from 1/4" plate. I cant afford calmini they think its made of gold.
-
I tried that, I just did not know when to stop choping! LMFAO
-
The guy I run with hase a custom built ford truggy and i can go most anywhere he goes.
-
Nice meeting you, If you will be at Haspen Halloween let me know, and by the way i'm not a freak LOL, And yes godsmack and 9"nails are good
-
I will be there Halloween weekend, can't wait. My name is Larry,and I have a wheelin problem. lol
-
The backlash and tooth pattern should be checked after installing.
-
I use the welded diff for off road only, It is very hard to turn on paved roads and could be dangerous! I have the gears in this pathy.
-
Welded mine with 110 volt wire welder .035 mild steel wire, It has held up real good.
