Jump to content
  • Sign In Changes:  You now need to sign in using the email address associated with your account, combined with your current password.  Using your display name and password is no longer supported.

 

  • If you are currently trying to register, are not receiving the validation email, and are using an Outlook, Hotmail or Yahoo domain email address, please change your email address to something other than those (or temporary email providers). These domains are known to have problems delivering emails from the community.

cdhicks99

Members
  • Posts

    1,667
  • Joined

  • Last visited

Everything posted by cdhicks99

  1. I thought the bias would be better at low pressure?
  2. I will be ordering them online.
  3. Any ideas? I have a few prices but there are so many to lookat I figured this would be quicker.
  4. Anyone make urethane bushing kits?
  5. There are alot of members from CO that might do it for less. Otherwise that is probably about right for a shop to do it.
  6. I have seen people use window screen over their rad. to help some then when it's dirty just take it off and wash it in a mudhole then replace.
  7. Where are you located?
  8. Nice pics, and congrats on a succesful trip. It sounds like you had an easy day as far as repairs go! My tips: Rock sliders take it slower through the mud
  9. Oh, I didn't check that, and assuming could be bad.
  10. Use a wire brush to knock most of it off then use a spay-in bedliner on it.
  11. OK I skimmed this entire thread and didn't see any mention of this so here's my .02 While looking for new JGC springs I found a list of all the vehicles with the exact same coils. TRW VARIABLE RATE SPRINGS Part Number: CC782 This product fits the following vehicles JEEP 1984 - 1996 CHEROKEE 1989 - 1990 GRAND WAGONEER 1986 - 1992 COMANCHE 1984 - 1990 WAGONEER 1993 - 1996 GRAND CHEROKEE
  12. I can check tonight if no one else gets the answer.
  13. Belt dressing is designed to conceal problems not fix them.
  14. I thought it was ocean front property in AZ?
  15. Agreed! Beat the piss out of it!
  16. Stainless is always good insurance!
  17. What do you think my best option is then?
  18. These are the kinda tips I'm looking for......Thanks Does the 3.3 bolt up directly? What the hell is a DT30?
  19. I joined NOAS today, and the 4X4.com boards. Thanks guys!
  20. I am not going for max HP just an increase, I am going only one step above stock on the cam. That being said would I stiil need the ECU redone? Your right dual exh. maybe overkill with the moderate HP increase. I have no emissions laws holding me back And hopefully soon after this I will be going with a snorkel so air intake isn't a priority right now.
  21. I have weighed my options on a 350 and I think I'd be better w/ the 3.0.
×
×
  • Create New...