Leaderboard

I believe the bulb is removable and the size is 74.

Alright I got the limiting straps finished up today. The sway bar presents a bit of an obstacle so I used some one inch square tube make an upper mounting bracket that helps clear the sway bar for a relatively straight pull. I probably went a little overboard, but I wanted those brackets to be strong so I boxed in the end of the square tube and also reinforced the area of the frame that I welded to with some 1/4” plate to stiffen the area up. The lower mount is welded to a piece of 1/4” plate that is then welded to the control arm. It works! No more noticeable top out over potholes and such. The limit straps are designed to stretch about an inch so instead of a jarring jolt they cushion the impact as they hit their limit so the violent bang of the strut topping out is gone. I also cut off my rusty exhaust, and put in a Y pipe that goes into a single inlet stainless magnaflow muffler with a turn down before the rear axle. Simple set up, and it sounds really nice. It sounds a little like a 350z but in a non ricey way, lol. Sent from my iPhone using Tapatalk

Audioslave

PANTERA.....COWBOYS FROM HELL!

Alternating between Soundgarden "superunknown" and Hendrix greatest hits right now.

right now i have an older cd i mixed with three doors down, creed, bob marley, and sublime on it

Either Sublime or Dr. Dre Chronic 2001.