Meandmy92Pathy Posted April 19, 2011 Share Posted April 19, 2011 I know that there are a lot of post here about the door lock timer, but I thought I would post some pics as I was checking mine out...... Left Rear Inside all intact...... With speaker, jack and panel removed!!!!! Closeup of the door lock timer!!!!! Hope this helps whoever is looking into this problem!!!!!! Todd 1 Link to comment Share on other sites More sharing options...
JamesRich Posted April 20, 2011 Share Posted April 20, 2011 So did you fix yours? James Link to comment Share on other sites More sharing options...
Meandmy92Pathy Posted April 20, 2011 Author Share Posted April 20, 2011 no, there were no broke or even suspicious solder joints......it's just kind of sporadic, sometimes it works and sometimes it won't just need to get a new one I guess Link to comment Share on other sites More sharing options...
teixeira Posted April 29, 2011 Share Posted April 29, 2011 Does that closes the doors after you reached 2 or 3 miles? I don't think I have that extra on mine... Link to comment Share on other sites More sharing options...
Meandmy92Pathy Posted April 29, 2011 Author Share Posted April 29, 2011 Does that closes the doors after you reached 2 or 3 miles? I don't think I have that extra on mine... No, it's the module that makes the power locks work as well as the keyless entry Link to comment Share on other sites More sharing options...
ahardb0dy Posted April 30, 2011 Share Posted April 30, 2011 I just got done helping someone on another forum with a lock problem, it turned out to be a broken wire between the timer and the master window switch on the drivers door, he ran a new power wire to the timer and it fixed it all. Link to comment Share on other sites More sharing options...
RoDy Posted May 15, 2011 Share Posted May 15, 2011 does anyone has a picture of the conecctor just to see where the wires go in mine there were no conecctors or timer :s i just got a used timer but I need a diagram were the wires go to!... Link to comment Share on other sites More sharing options...
NissanNismoZ Posted May 15, 2011 Share Posted May 15, 2011 not to but..how do you know when your door lock timer is bad? coz all my doors lock when you push down on teh driver or passenger side lock..and the unlock/lock buttons work fine..but not my keyless? Link to comment Share on other sites More sharing options...
RoDy Posted May 16, 2011 Share Posted May 16, 2011 thats ur alarm unit not the door lock timer.. Link to comment Share on other sites More sharing options...
Inyourface1650 Posted July 29, 2011 Share Posted July 29, 2011 (edited) Scratch that - found it. here are some pics. Theres my problem, this trace blew out. I will try and solder it. Heres the part http://www.courtesyparts.com/28450x-timer-assy-door-lock-pathfinder-wd21-02/1994-cal-w/4d-4wd-02/1994-fed-v/4d-fed-w/4d-4wd-w/4d-2wd-02/1-p-546043.html?cPath=5572_5573_5611_5618& $93.00. Ouch. Junk yard time. Edited July 29, 2011 by Inyourface1650 Link to comment Share on other sites More sharing options...
Inyourface1650 Posted July 29, 2011 Share Posted July 29, 2011 Well I ran a bead of solder accross that gap and the doors still wont lock. I can hear the relay clicking and trying, but failing miserably hahah. I ran over the junk yard and found a module out of a 95 XE but it was a 28453-9975, and did not make the locks work either... Link to comment Share on other sites More sharing options...
Slartibartfast Posted July 30, 2011 Share Posted July 30, 2011 The trace looks awfully clean and square-ended for a burnout. If the board was buggered enough to blow a trace, I'll bet several components would have already released the factory smoke. There's always the chance that your problem isn't that unit, but a bad wire somewhere between it and the lock actuators, a bad ground, etc. Link to comment Share on other sites More sharing options...
JamesRich Posted July 30, 2011 Share Posted July 30, 2011 I love it when they feel the need to put "don't drop" on the part. Like someone was going to drop it on purpose. They should put "If you just dropped it your probably screwed". James Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now