Mrelcocko Posted May 19, 2018 Share Posted May 19, 2018 Does anyone know other than infinitiusa where I could purchase rear coil springs? Mr Cox R50 Link to comment Share on other sites More sharing options...
Bax03SE Posted May 20, 2018 Share Posted May 20, 2018 Moog makes an oem replacement set. Those seem to be the ones I see used most often when people are looking for stock spring replacements. I actually have a set with only a couple thousand miles on them collecting dust in my garage. If you were closer Id let you have them, but from reading your posts I dont think you live anywhere near me (Delaware). 1 Link to comment Share on other sites More sharing options...
03TroutFinder Posted May 20, 2018 Share Posted May 20, 2018 (edited) Does anyone know other than infinitiusa where I could purchase rear coil springs? Mr Cox R50 I have a set of MOOG OEM replacement rear springs if your interested. I had them on for about 6 months, then ordered the Land Rover springs. I also have the 2.5" lift spacers too since the LR springs provide lift without the need for spacers. Let me know if your interested. Sent from my SAMSUNG-SM-G930A using Tapatalk Edited May 20, 2018 by 03TroutFinder 2 Link to comment Share on other sites More sharing options...
Mrelcocko Posted May 27, 2018 Author Share Posted May 27, 2018 KNOXVILLE, TENN Moog makes an oem replacement set. Those seem to be the ones I see used most often when people are looking for stock spring replacements. I actually have a set with only a couple thousand miles on them collecting dust in my garage. If you were closer Id let you have them, but from reading your posts I dont think you live anywhere near me (Delaware). Mr Cox R50 Link to comment Share on other sites More sharing options...
Grumpyboy Posted June 2, 2018 Share Posted June 2, 2018 If you are interested I have a set. I also have a set of front struts and springs if you need them. I am located in western N.C. 1 Link to comment Share on other sites More sharing options...
Mrelcocko Posted June 11, 2018 Author Share Posted June 11, 2018 How much? I have a set of MOOG OEM replacement rear springs if your interested. I had them on for about 6 months, then ordered the Land Rover springs. I also have the 2.5" lift spacers too since the LR springs provide lift without the need for spacers. Let me know if your interested. Sent from my SAMSUNG-SM-G930A using Tapatalk Mr Cox R50 Link to comment Share on other sites More sharing options...
Mrelcocko Posted June 11, 2018 Author Share Posted June 11, 2018 If you are interested I have a set. I also have a set of front struts and springs if you need them. I am located in western N.C.Mine are just worn out and I need a set bad. I'm in east Tennessee which may be close to you since your in western NC. I need a set of struts for 96 Pathy and the springs for the rear on my 97 Quey. Mr Cox R50 Link to comment Share on other sites More sharing options...
Mrelcocko Posted June 13, 2018 Author Share Posted June 13, 2018 If you are interested I have a set. I also have a set of front struts and springs if you need them. I am located in western N.C.I'm interested. Mr Cox 96R50-97JR50 Link to comment Share on other sites More sharing options...
antkur Posted June 16, 2018 Share Posted June 16, 2018 I have a set of MOOG OEM replacement rear springs if your interested. I had them on for about 6 months, then ordered the Land Rover springs. I also have the 2.5" lift spacers too since the LR springs provide lift without the need for spacers. Let me know if your interested. Sent from my SAMSUNG-SM-G930A using Tapatalk Can you share which Land Rover springs you ordered? Did the set worked for front and back? Thx Link to comment Share on other sites More sharing options...
RainGoat Posted June 18, 2018 Share Posted June 18, 2018 Can you share which Land Rover springs you ordered? Did the set worked for front and back? ThxHere is the composite forum experience to date. Look up the Land Rover Spring thread for details: Land Rover Defender 90 Spring Summary http://www.red90.ca/rovers/springinfo.html 5” Inner Diameter NRC9446 +2.5-3 (15Spring Ht) 0.5-1" rake c 2 front spacers 175# Spring Rate LR 90 Defender-Front Driver (0.5" longer than passenger) NRC9447 +2-2.5" (Micah got 4") 175# Spring Rate LR 90 Defender-Front Passenger NRC9448 +4(Perfect c 4"SFD), cut one coil=3" 225# Spring Rate (LR 90 Defender-Rears) $80 Delivered from UK NRC9449 +2-2.5" (same Height as NRC9447) 225# Spring Rate (heavier Load than NRC9447) 1badqx4 9446: neilca(35"F/36"R c 31"tireMid Fender Ht) 9447: 19pathfinder99, MichaelAndrews, micahfelker(37-37.5" c 31"tire, MD OME Springs, F=HD OME), thehillboys (Bilstein 1525 shocks) LR - 34 1/4" to 38 1/2" settled to 37.5" net 3 1/4" RR-33 3/4" to 38" settled to 37.5" net 3 3/4" Front 35” c Moog OEM Springs, KYB Struts & 1 1/2" spacer LF - 32 1/2" to 35 net 2 1/2" (slightly uneven shop floor) LR- 32" to 35 net 3" Rake 2.5” 9448: hawairish, TowndawgR50, drewp29, Bax03SE(37"F/38"R c 33"tire Mid Fender Ht-1 coil cut) 9449: 03Troutfinder (36.5" from 34", same ht as OEM Spring+2”spacer) Order from LRdirect Brands-few reviews on LR forums say Brit Part (c8) springs held up better than OEM Land Rover against sagging Sent from my iPhone using Tapatalk Pro 1 Link to comment Share on other sites More sharing options...
Mrelcocko Posted June 21, 2018 Author Share Posted June 21, 2018 Moog makes an oem replacement set. Those seem to be the ones I see used most often when people are looking for stock spring replacements. I actually have a set with only a couple thousand miles on them collecting dust in my garage. If you were closer Id let you have them, but from reading your posts I dont think you live anywhere near me (Delaware).Rock auto. Thanks Mr Cox 96R50-97JR50 Link to comment Share on other sites More sharing options...
Mrelcocko Posted June 21, 2018 Author Share Posted June 21, 2018 I have a set of MOOG OEM replacement rear springs if your interested. I had them on for about 6 months, then ordered the Land Rover springs. I also have the 2.5" lift spacers too since the LR springs provide lift without the need for spacers. Let me know if your interested. Sent from my SAMSUNG-SM-G930A using Tapatalk I found some thanks anyways Mr Cox 96R50-97JR50 Link to comment Share on other sites More sharing options...
Cbiggy Posted July 2, 2018 Share Posted July 2, 2018 (edited) Speaking of rear springs and spacers, I am gonna do the max all around body lift kit by sf creations for my 03 pathfinder, I am just a little confused of if I will need to get struts that are longer or if the spacers will work without anything done to the struts. I want to order the spacers this week so an answer would be highly appreciated. Thanks, Clark Edited July 2, 2018 by Cbiggy 1 Link to comment Share on other sites More sharing options...
mjotrainbrain Posted July 3, 2018 Share Posted July 3, 2018 5 hours ago, Cbiggy said: Speaking of rear springs and spacers, I am gonna do the max all around body lift kit by sf creations for my 03 pathfinder, I am just a little confused of if I will need to get struts that are longer or if the spacers will work without anything done to the struts. I want to order the spacers this week so an answer would be highly appreciated. Thanks, Clark Gonna answer your question and address some confusion you seem to have. First of all, it's not a body lift, it's a suspension lift. You can't do a body lift on these vehicles since they're unibody. Secondly, longer struts would not help you with spacers, they would only be helpful with actual longer coils. However, longer struts do not exist for these vehicles unfortunately, best you can do is when the time comes to replace your struts get KYB (with OEM accessories). The rear is where longer shocks would help by giving more articulation, however they are not necessary. As a general word of advice, buy yourself a can or two of PB Blaster and make sure to liberally spray down all the bolts you'll need to be messing with daily leading up to the job so you can actually get those 15 year old bolts loose without having to break out the death wheel (angle grinder). 1 Link to comment Share on other sites More sharing options...
Mrelcocko Posted July 3, 2018 Author Share Posted July 3, 2018 I'm interested. Mr Cox 96R50-97JR50Sorry I haven't got back to you. Been so busy with work and all. I'd love to take them off your hands, but right now I'm strapped for money. Maybe in a few weeks it will be feasible. If you still have them when I get caught up I'll message you. Thanks again.Mr Cox 96R50-97JR50 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now