Jump to content
  • Sign In Changes:  You now need to sign in using the email address associated with your account, combined with your current password.  Using your display name and password is no longer supported.

 

  • If you are currently trying to register, are not receiving the validation email, and are using an Outlook, Hotmail or Yahoo domain email address, please change your email address to something other than those (or temporary email providers). These domains are known to have problems delivering emails from the community.

XTERRA transmission in 96 Pathy 2WD

atlakeem

By atlakeem,
in 96-2004 R50 Pathfinders

 Share

Recommended Posts

atlakeem NPORA Newbie

atlakeem

Posted
Posted

ok so i found an 04 xterra transmission online 158k miles for a good price. Its an actually shop that sells it. They say the wiring may differ from my vehicle, which is a 96 Pathy. Anyone know for certain that the wiring will match with no problem? I've search but can't find someone who actually did the swap. (non-supercharged tranny btw)

Link to comment
Share on other sites
Cuong Nguyen NPORA Old-Timer

Cuong Nguyen

Posted
Posted (edited)

ok so i found an 04 xterra transmission online 158k miles for a good price. Its an actually shop that sells it. They say the wiring may differ from my vehicle, which is a 96 Pathy. Anyone know for certain that the wiring will match with no problem? I've search but can't find someone who actually did the swap. (non-supercharged tranny btw)

Should be plug and play.

 

Sent from my SAMSUNG-SM-N920A using Tapatalk

Edited by Cuong Nguyen
Link to comment
Share on other sites
adamzan NPORA Old-Timer

adamzan

Posted
Posted

You will need:

 

Xterra trans (obviously)

Torque converter from Xterra trans (most places include this but make sure)

If it is from a supercharged you'll need the flywheel as well

Need to reuse the r50 sub-harness as it is the proper length

Some extra vacuum line for the vent hoses

 

It is plug and play. I have an 02 or 04 SC xterra transmission in my 1994 pathfinder. Has been in there since 2013.

  • Like 1
Link to comment
Share on other sites
atlakeem
NPORA Newbie

atlakeem

Posted
  • Author
Posted

You will need:

 

Xterra trans (obviously)

Torque converter from Xterra trans (most places include this but make sure)

If it is from a supercharged you'll need the flywheel as well

Need to reuse the r50 sub-harness as it is the proper length

Some extra vacuum line for the vent hoses

 

It is plug and play. I have an 02 or 04 SC xterra transmission in my 1994 pathfinder. Has been in there since 2013.

 

thank you very much!

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing
×
×
  • Create New...