Jump to content

Does anyone use the K&N Cone Air Filter on a WD21?


crab
 Share

Recommended Posts

Used to have one on an old Toyota, gave a nice increase in power. Which model do you need for a WD21? I see the stock replacement filters available but was wondering about the cone shaped ones.

Link to comment
Share on other sites

I've never noticed an increase in power with a drop in filter or a cone filter. And with the cleanable filters I've always had to clean my maf much more frequently and after a while it got annoying because the cone filter I had wouldn't hold the oil in place. It would always run down and drip off no matter how little oil I used. Personally I'd stick with a standard paper filter.

 

With it being an offroad vehicle I've never liked the thought of having an open element air filter under my hood, but I don't know if you off road or not.

 

Sent from inside my potato

Link to comment
Share on other sites

I'll just add x10 to this.

MAYBE it does something if you have a VG33 transplant or VG34 build, but for a stock VG30 (even with cams and headers from what I can tell), there is no point.

The stock VG30 system seems to breathe better than the motor needs. Farting is another story though...

 

If you want to run a snorkel, it is a good way to go then.

 

B

  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...