1987caddy Posted April 19, 2016 Share Posted April 19, 2016 I lucked out on Craigslist and found a set of 16x7 R50 wheels for only $50. My pathfinder is getting a new clutch this week so I didn't get to check if the front hubs will fit through the R50 wheels. Has anyone tried this before? Looking forward to moving up from 235/75/15 to 245/75/16 tires and deciding on ball joint spacers or new UCA's Link to comment Share on other sites More sharing options...
bushnut Posted April 19, 2016 Share Posted April 19, 2016 should be no problem as I'm running "lego" wheels on an R50 Link to comment Share on other sites More sharing options...
nunya Posted April 20, 2016 Share Posted April 20, 2016 I think r50 wheels have different back spacing that may make them sit 'tucked in' the fenders some. I know I e seen lego's on r59s but honestly can remember seeing the other way around... Link to comment Share on other sites More sharing options...
RIPB.88 Posted April 20, 2016 Share Posted April 20, 2016 Shouldnt be a problem. If they suck in to much then just get some wheel spacers. And DONT get the ball joint spacers as they will cause problems. Better off to just get new UCA's. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now