ferrariowner123 Posted October 19, 2014 Share Posted October 19, 2014 Uh oh, better check Kyle's pockets (and his recent whereabouts)!!!!! That sucks, but I'm sure another will show up there soon, could even give them your info and have them call you when they get one in. Haha If I were in New York, that might have been true, but kouki pathfinders have really held their value up in the Northwest, probably due to our rust free cars. They come up, rarely at junkyards. I almost scored an entire front end for, $400! But the idiot didn't update his Craigslist, I was so pissed. But he's right. They will come up, I'm really counting on it. -Kyle Link to comment Share on other sites More sharing options...
thorpe991 Posted October 19, 2014 Author Share Posted October 19, 2014 Yeah i would had the whole front end for under 300 usd Link to comment Share on other sites More sharing options...
thorpe991 Posted October 19, 2014 Author Share Posted October 19, 2014 Now its time to check other non local jy to try and find a fender after seeing rockautos price of a 100 per fender Link to comment Share on other sites More sharing options...
Rebelord Posted October 20, 2014 Share Posted October 20, 2014 There's a facelift Pathfinder for parts down here. I'll find the add and see if its worth it for ya Sent from my Moto X Link to comment Share on other sites More sharing options...
ferrariowner123 Posted October 20, 2014 Share Posted October 20, 2014 I wouldn't advise rock auto for body panels, their shipping is fairly ridiculous. It puts it to the point where you might as well start talking to your local dealer. Oh, now everyone is up in arms to find updated parts? I've been asking for months! Lol -Kyle Link to comment Share on other sites More sharing options...
thorpe991 Posted October 20, 2014 Author Share Posted October 20, 2014 Iv been looking on the down low since i got mine just didnt make it public as i didn't have a real reason to spend the extra cash but i think next summer ill slowly accommodate parts to do it because iv got my hands full with a motor swap and build on my camarofor winter Link to comment Share on other sites More sharing options...
thorpe991 Posted October 20, 2014 Author Share Posted October 20, 2014 These are the ones i would love to get buy the few pairs iv seen on Ebay are like 500-700 per lense http://www.google.com/imgres?imgurl=http%3A%2F%2Fi232.photobucket.com%2Falbums%2Fee31%2Fokigsxr%2Ft8.jpg&imgrefurl=http%3A%2F%2Fforums.nicoclub.com%2Foem-nissan-terrano-regulus-headlights-projector-t554110.html&h=768&w=1024&tbnid=L2-Q-pQeDbAnOM%3A&zoom=1&q=1997%20nissan%20terrano%20headlights&docid=I2NKvlah8gXMeM&hl=en&ei=z1pEVNvNDYyyyASR1IHIDg&tbm=isch&client=ms-android-sprint-us&ved=0CEEQMygaMBo&iact=rc&uact=3&page=4&start=26&ndsp=8 Link to comment Share on other sites More sharing options...
Rebelord Posted October 20, 2014 Share Posted October 20, 2014 Well looks like one fender might have some damage. But the drivers side looks good. Facelift link: http://miami.craigslist.org/mdc/ptd/4684677755.html Pre-facelift, whole front clip is 100%: http://miami.craigslist.org/mdc/pts/4694149851.html Link to comment Share on other sites More sharing options...
thorpe991 Posted October 20, 2014 Author Share Posted October 20, 2014 If i had a way to get one up here to ny i would so do that haha Link to comment Share on other sites More sharing options...
Rebelord Posted October 20, 2014 Share Posted October 20, 2014 They sell parts off of them. Don't have to buy the whole thing Sent from my Moto X Link to comment Share on other sites More sharing options...
thorpe991 Posted October 20, 2014 Author Share Posted October 20, 2014 O ok i wonder what the shipping is from fl to ny Link to comment Share on other sites More sharing options...
thorpe991 Posted October 20, 2014 Author Share Posted October 20, 2014 Got a windshield today going to see if tomorrow i can borrow my dads truck to drive to work so i can put the window in Link to comment Share on other sites More sharing options...
PINION Posted October 20, 2014 Share Posted October 20, 2014 there are a few on Long Island CL in good shape, How far up are you Link to comment Share on other sites More sharing options...
ferrariowner123 Posted October 20, 2014 Share Posted October 20, 2014 These are the ones i would love to get buy the few pairs iv seen on Ebay are like 500-700 per lense http://www.google.com/imgres?imgurl=http%3A%2F%2Fi232.photobucket.com%2Falbums%2Fee31%2Fokigsxr%2Ft8.jpg&imgrefurl=http%3A%2F%2Fforums.nicoclub.com%2Foem-nissan-terrano-regulus-headlights-projector-t554110.html&h=768&w=1024&tbnid=L2-Q-pQeDbAnOM%3A&zoom=1&q=1997%20nissan%20terrano%20headlights&docid=I2NKvlah8gXMeM&hl=en&ei=z1pEVNvNDYyyyASR1IHIDg&tbm=isch&client=ms-android-sprint-us&ved=0CEEQMygaMBo&iact=rc&uact=3&page=4&start=26&ndsp=8 Nah, you have got to think outside the box, I bought mine, DIRECTLY from Japan. Had them purchased for my by a gentlemen in Japan, he then repacked each of them up, and then shipped them to me. I just got a quote for $300 for a pair of zenki HID headlights. Wasn't sure if they came with pigtails, but i know where to get everything you need. Heck I've started my own little collection of adjustment switches. My kouki lights were $500 all said and done. But those are all over the board in terms of price ($60-$130) and are kinda hard to come by at the moment. I've been contemplating getting another drivers side light to replace the broken one I have. But it's really not that bad as what you're seeing. Especially for zenki lights. -Kyle Link to comment Share on other sites More sharing options...
thorpe991 Posted October 20, 2014 Author Share Posted October 20, 2014 If i could get a set shipped in for 300 with wiring i would do it but i dont have the money at the moment Link to comment Share on other sites More sharing options...
thorpe991 Posted October 20, 2014 Author Share Posted October 20, 2014 so i was just looking and it seams that the mount that is broken on my head light can be replaced does anybody have a pic of the back of the headlight so i can see how it hooks to the lense Link to comment Share on other sites More sharing options...
ferrariowner123 Posted October 20, 2014 Share Posted October 20, 2014 If i could get a set shipped in for 300 with wiring i would do it but i dont have the money at the moment Challenge accepted. As long as it's not the adjustment wiring. Lol -Kyle Link to comment Share on other sites More sharing options...
thorpe991 Posted October 21, 2014 Author Share Posted October 21, 2014 Nope just the bulb wireing haha houseings and mounts but i wouldent be able to get them till december Link to comment Share on other sites More sharing options...
ferrariowner123 Posted October 21, 2014 Share Posted October 21, 2014 (edited) I'll keep my eye out for you. And I need to complain more often! I just found out there is a kouki pathfinder at my local pick n pull. Hope it's got some parts I can use! -Kyle Edited October 21, 2014 by ferrariowner123 1 Link to comment Share on other sites More sharing options...
thorpe991 Posted October 23, 2014 Author Share Posted October 23, 2014 Got me a 02 bumper and fender Link to comment Share on other sites More sharing options...
thorpe991 Posted October 23, 2014 Author Share Posted October 23, 2014 Relized i for got the bumper support Link to comment Share on other sites More sharing options...
ferrariowner123 Posted October 23, 2014 Share Posted October 23, 2014 You need that. Haha Don't need the core support though. All of that is the same! -Kyle Link to comment Share on other sites More sharing options...
thorpe991 Posted October 24, 2014 Author Share Posted October 24, 2014 I think I'm going to make one out of galvinized steel so i can still have my led bar without drillin threw the support Link to comment Share on other sites More sharing options...
thorpe991 Posted October 24, 2014 Author Share Posted October 24, 2014 Instead of being solid its going to be more like a frame Link to comment Share on other sites More sharing options...
ferrariowner123 Posted October 24, 2014 Share Posted October 24, 2014 Dude, just get the support, the hours spent trying to make one that will fit the bumper, and make it fit the car, will be indefinite. Lots of guys have put lights though the bumper to the factory bumper support, or to the grill, which look fine too. Just my take on it, but you are going to have a lot of time spent making it fit. -Kyle Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now