MrEviLDeD Posted March 28, 2014 Share Posted March 28, 2014 Hello everyone, I have kind of asked this before but it was before having actual fuel lines for my pathfinder. Does anyone have first hand experience with the connectors that hold the each of the three lines going front to back? The images I have seen and the diagrams I have do not really convey what I will need to do to properly re-use the connectors. In fact I am thinking that the previous fellow tried to remove the old fuel lines and this is why he broke them and resorted to using rubber lines instead. To me this means those connections along the body of the pathfinder will not be of use to me meaning these three fuel lines are at this moment useless to me unless I buy and replace all the connection hardware to the body as well. Anyone want to buy a 1993 Pathfinder XE-V6 for 5000$ ) IM KIDDING!!! Link to comment Share on other sites More sharing options...
adamzan Posted March 28, 2014 Share Posted March 28, 2014 Get some clamps like this you can find them anywhere, and just screw them to the frame. 2 Link to comment Share on other sites More sharing options...
Alkorahil Posted March 28, 2014 Share Posted March 28, 2014 Nice job Adamzan, I like that! Link to comment Share on other sites More sharing options...
3rdtimesacharm Posted March 28, 2014 Share Posted March 28, 2014 Look at that chassis Link to comment Share on other sites More sharing options...
MrEviLDeD Posted March 28, 2014 Author Share Posted March 28, 2014 Going to get messy with three lines running down there. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now